Epson PowerLite 1825 Podręcznik użytkownika - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Oprogramowanie Epson PowerLite 1825. Epson PowerLite 1825 14 stron. Release of check tool for network projectors v1.00 for windows
Również dla Epson PowerLite 1825: Podręcznik użytkownika (42 strony), Instrukcja obsługi (36 strony), Szybka konfiguracja (2 strony), Instrukcja obsługi (47 strony), Deklaracja zgodności (4 strony), Specyfikacja produktu (2 strony), Lista części (1 strony), Biuletyn wsparcia produktu (25 strony), Biuletyn wsparcia produktu (38 strony), Biuletyn wsparcia produktu (12 strony), Biuletyn wsparcia produktu (42 strony), Biuletyn wsparcia produktu (22 strony), Biuletyn wsparcia produktu (28 strony), Biuletyn wsparcia produktu (41 strony), Biuletyn wsparcia produktu (34 strony), Biuletyn wsparcia produktu (38 strony), Biuletyn wsparcia produktu (28 strony), Biuletyn wsparcia produktu (15 strony), Biuletyn wsparcia produktu (22 strony)

Epson PowerLite 1825 Podręcznik użytkownika
Status lights (continued)
Light
Status
Description
Red
The projector is overheating, which turns
the lamp off automatically. Wait until the
cooling fan stops, then unplug the power
cord. Plug the cord back in and press the
Power button. Make sure the room
P
temperature is not above 95 °F (35 °C),
and there is plenty of space around and
under the projector for ventilation.
If you're using the projector above an
altitude of 5,000 feet (1,500 meters),
turn on High Altitude Mode in the
Operation menu. Do not use the projector
above 7,500 feet (2,286 meters).
The air filter or vents may be clogged.
Clean them or replace the air filter.
If the projector continues to overheat after
you clean the air filter, the problem may be
caused by damage to the cooling fan or
temperature sensor. Contact Epson for
help.
Flashing
There is a problem with the fan or
red
temperature sensor. The air filter or vents
may be clogged. Clean them or replace the
air filter.
If this does not resolve the problem, stop
using the projector, disconnect the power
cable, and contact Epson for help.
Flashing
It's time to replace the lamp. See page 12
orange
for instructions. If you continue to use the
lamp after the replacement warning, there
is an increased possibility that the lamp
may break.
Flashing
The lamp may be burnt out. First make
red
sure the lamp cover is securely installed. If
that's not the problem, let the lamp cool,
then replace it as described on page 12.
The air filter or vents may be clogged.
Clean them or replace the air filter. If this
does not resolve the problem, contact
Epson.
Flashing
Power is cut off because of an internal
red
problem. Unplug the power cord and
contact Epson for help.

Maintaining the Projector

Warning: Before you clean any part of the projector, turn it off and
unplug the cord. Never open any cover on the projector, except the
lamp cover. Dangerous electrical voltages in the projector can injure
you severely. Do not try to service this product yourself, except as
specifically explained here or in the User's Guide. Refer all other
servicing to qualified service personnel.

Cleaning the Lens

Clean the lens whenever you notice dirt or dust on the surface.
❏ Use a canister of compressed air to remove dust.
❏ To remove dirt or smears on the lens, use a commercially
available cloth for cleaning glasses.
Caution: Do not spray liquid or glass cleaner directly on the lens.

Cleaning the Projector Case

Before you clean the case, turn off the projector and unplug the
power cord.
❏ To remove dirt or dust, wipe the case with a soft, dry,
lint-free cloth.
❏ To remove stubborn dirt or stains, wipe the case with a soft
cloth moistened with water and a mild detergent.
Caution: Do not use wax, alcohol, benzene, paint thinner, or other
chemical detergents. These can damage the case.

Cleaning the Air Filter and Vent

Your projector includes an air filter to ensure the best
performance and protect your investment. If dust collects on
the air filter (on the bottom of the projector) or vent (on the
front of the projector), clean them as described below. Dust
clogs prevent proper ventilation and can cause overheating,
which can damage the projector.
Follow these steps:
1. Turn off the projector and unplug the power cord.
2. To clean the intake vent and filter, use a small vacuum
cleaner designed for computers and other office equipment.
If you don't have one, gently clean the vent with a soft
brush (such as an artist's paintbrush).
2/08
PowerLite 1825
11