Epson PowerLite 765c Instrukcja obsługi - Strona 6

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oprogramowanie Epson PowerLite 765c. Epson PowerLite 765c 26 stron. Release of check tool for network projectors v1.00 for windows
Również dla Epson PowerLite 765c: Podręcznik użytkownika (42 strony), Instrukcja obsługi (36 strony), Instrukcja obsługi (47 strony), Lista części (1 strony), Biuletyn wsparcia produktu (30 strony), Szybka konfiguracja (2 strony), Instrukcja instalacji (19 strony), Podręcznik użytkownika (1 strony), Podręcznik funkcji (5 strony), Biuletyn wsparcia produktu (25 strony), Biuletyn wsparcia produktu (38 strony), Biuletyn wsparcia produktu (12 strony), Biuletyn wsparcia produktu (42 strony), Biuletyn wsparcia produktu (22 strony), Biuletyn wsparcia produktu (28 strony), Biuletyn wsparcia produktu (41 strony), Biuletyn wsparcia produktu (34 strony), Biuletyn wsparcia produktu (38 strony), Biuletyn wsparcia produktu (28 strony), Biuletyn wsparcia produktu (15 strony), Biuletyn wsparcia produktu (22 strony), Szybka konfiguracja (2 strony)

Drukuj stronę

Epson PowerLite 755c/765c Projector

3. If the projector is not level, rotate the

foot at the back of the projector.

If the image is no longer rectangular after

raising it, see the next section.

Correcting Computer Images

If you've connected a computer and the image doesn't look

right, or it doesn't fit properly on the screen, press the

button on the remote control or the

projector. This automatically resets the projector's tracking,

sync, resolution, and position settings. (You must be projecting

an image for this button to have any effect.)

Note:

If the

option in the Signal menu is set to

Auto Setup

Auto function will not work.

Adjusting the Image Shape

The projector automatically corrects images that are distorted

when the projector is tilted up or down (up to 30°). The

Keystone window appears on the screen while the projector

makes the correction.

Projector tilted up

Corrected image

If the projected image still isn't rectangular, try the following:

If your image looks like

projector off to one side of the screen, at an angle. Move it

directly in front of the center of the screen, facing the screen

squarely.

If your image looks like

manually adjust the keystone correction value. Follow the

instructions below.

Epson PowerLite 755c/765c Projector

Auto

button on the

Enter

, the

OFF

Projector tilted down

, you've placed the

, you may need to

Using Keystone Correction

To adjust your image when it is wider on the top or bottom, do

one of the following:

Press one of the two triangular buttons on the projector's

control panel, as shown below. Continue pressing the button

until you are satisfied with the shape of the image.

Or press the

projector, select the

the Setting menu, select

pointer button on the remote control to adjust the

keystone setting as needed. The keystone setting is adjustable

from –65 to +65. These numbers represent a range of –30°

to +30° of angle change; adjustments are made in steps of

0.5°.

After correction, your image will be slightly smaller.

Note:

If the image becomes uneven, try decreasing the

in the Image menu.

Resizing Video images

You can use the

Resize

how an image fits into the display area.

For video images, press

between 4:3 and 16:9. This lets you play certain digital video

images or movies recorded on certain DVDs in 16:9 widescreen

format.

For computer images, resizing is normally unnecessary, since

the projector automatically resizes the image to make the best

use of the display area. If you press the

projector or remote control, the projector displays the image at

the output resolution of the computer (which makes the image

larger or smaller, depending on its resolution). If the resolution

of the image is the same as the projector's (1024

pressing

has no effect.

Resize

8/05

button on the remote control or

menu, and press

Setting

Enter

and press

Keystone

Enter

Sharpness

button on the remote control to adjust

to switch the aspect ratio

Resize

button on the

Resize

. From

. Use the

setting

768),