Epson PowerLite 83c Podręcznik z informacjami o produkcie - Strona 6

Przeglądaj online lub pobierz pdf Podręcznik z informacjami o produkcie dla Oprogramowanie Epson PowerLite 83c. Epson PowerLite 83c 16 stron. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Również dla Epson PowerLite 83c: Podręcznik użytkownika (42 strony), Instrukcja obsługi (36 strony), Instrukcja obsługi (47 strony), Podręcznik szybkiej konfiguracji (7 strony), Podręcznik funkcji (5 strony), Biuletyn wsparcia produktu (5 strony), Biuletyn wsparcia produktu (25 strony), Biuletyn wsparcia produktu (22 strony), Lista części (1 strony), Biuletyn wsparcia produktu (28 strony), Deklaracja zgodności (4 strony), Biuletyn wsparcia produktu (41 strony), Biuletyn wsparcia produktu (15 strony), Biuletyn wsparcia produktu (22 strony)

Drukuj stronę

Epson PowerLite 83c Podręcznik z informacjami o produkcie

PowerLite 822p/83c Projector

Turning Off the Projector

When you've finished using the projector, follow the

recommended procedure to shut it down.

Note:

When sleep mode is enabled and the projector has not received any

input signals for the number of minutes specified in the Extended

menu (from 1 to 30), the projector automatically turns off the lamp

and enters "sleep mode." This conserves electricity, cools the

projector, and extends the life of the lamp. If you are done using the

projector, unplug the power cord. If you want to start projecting

again, plug it in and press the P

sleep mode on or off through the Extended menu.

1. If you're using a computer, shut it down first; otherwise you

may not be able to see your computer's display to shut it

down properly.

2. To turn off the projector, press the P

projector or remote control.

You see this confirmation

message: (If you don't want

to turn it off, press any other

button or wait a few seconds

until it disappears.)

3. Press the P

button again. The projector beeps

Power

twice, the lamp is turned off, and the P

orange.

Note:

With Epson's exclusive Instant Off

down period, so you can pack up and go immediately after

turning off the projector.

(If you want to turn the projector on again, press the

button.)

Power

4. Press up on the blue foot release lever and lower the

projector to retract the front adjustable foot, if necessary.

5. Close the

slide.

A/V Mute

6. Unplug the power cord.

7. Turn off and disconnect any

equipment plugged into the

projector.

Caution:

To avoid damaging the projector or lamp, never unplug the

power cord when the power light is green or flashing orange.

8. If you won't be using the projector for awhile, store it in a

protective case.

PowerLite 822p/83c Projector

button. You can turn

Power

button on the

Power

light turns

Power

technology there's no cool-

Adjusting the Image and Presentation

The following sections describe how to adjust the image and

control your presentation.

Focusing and Zooming Your Image

Rotate the focus ring to sharpen the image, and the zoom ring

to reduce or enlarge the image.

You can also change the image size by moving the projector

closer to or farther away from the screen. You can use the

buttons on the remote control to zoom in on a portion

E-Zoom

of the image. See page 8 for instructions.

Adjusting the Height of Your Image

If the image is too high or low, you can correct it by adjusting the

projector's front foot.

1. Stand behind the projector. Press up on the blue foot release

lever and lift the front of the projector to extend the front

adjustable foot.

2. Once the image is positioned where you want, release the

lever to lock the foot in position.

When the Auto Keystone feature is enabled in the Settings

menu, the projector automatically corrects images that are

distorted when the projector is tilted up (up to a 30° tilt). The

Keystone window appears on the screen while the projector

makes the correction. If the projected image still isn't

rectangular, follow the instructions in the next section.

3/08

Focus

Zoom