Toshiba 13A26 Instrukcja serwisowa - Strona 15
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla TV Toshiba 13A26. Toshiba 13A26 33 stron. Toshiba tv 13a26, 19a26 owner's manual
Również dla Toshiba 13A26: Instrukcja obsługi (29 strony), Instrukcja obsługi (29 strony), Instrukcja obsługi (15 strony), Instrukcja serwisowa (43 strony)
Drukuj stronę
White 100% Red 110%
2-5: HORIZONTAL PHASE
1.
Receive the monoscope pattern.
2.
Using the adjustment control, set the brightness and
contrast to normal position.
3.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (05) on the remote control to
select "H.PHAS".
4.
Press the VOL. UP/DOWN button on the remote
control until the SHIFT quantity of the OVER SCAN on
right and left becomes minimum.
2-6: VERTICAL SIZE
1.
Receive the monoscope Pattern.
2.
Using the adjustment control, set the brightness and
contrast to normal position.
3.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (06) on the remote control to
select "V.SIZE".
4.
Press the VOL. UP/DOWN button on the remote control
until the SHIFT quantity of the OVER SCAN on upside
and downside becomes 10 ± 2%.
2-7: VERTICAL SHIFT
1.
Receive the monoscope Pattern.
2.
Using the adjustment control, set the brightness and
contrast to normal position.
3.
Activate the adjustment mode display of Fig. 1-1
and press the channel button (07) on the remote
control to select "V.SFT".
4.
Press the VOL. UP/DOWN button on the remote
control until the horizontal line becomes fit to the
notch of the shadow mask.
ELECTRICAL ADJUSTMENTS
"A"
Fig. 2-1
Fig. 2-2
D-2
2-8: OSD HORIZONTAL
1.
Activate the adjustment mode display of Fig. 1-1.
2.
Press the VOL. UP/DOWN button on the remote
control until the difference of A and B becomes
minimum. (Refer to Fig. 2-3)
00 OSD
A
2-9: BRIGHT MANUAL
1.
Receive the monoscope pattern.(RF Input)
2.
Using the adjustment control, set the brightness and
contrast to normal position.
3.
Activate the adjustment mode display of Fig. 1-1 and
press the channel button (13) on the remote control to
select "BRI.CENT".
4.
Press the VOL.UP/DOWN button on the remote control
until the screen begin to shine.
5.
Press the TV/VIDEO button on the remote to set to the
AV mode. Then perform the above adjustment 2~4.
2-10: SUB CONTRAST
1.
Receive an 70dB the color bar pattern.
2.
Activate the adjustment mode display of Fig. 1-1
press the channel button (17) on the remote control
to select "CONT.MAX".
3.
Press the VOL. UP/DOWN button on the remote control
until the contrast step No. becomes "43".
4.
Press the TV/VIDEO button on the remote control to set
to the AV mode.
5.
Activate the adiustment mode display of Fig 1-1
paess the channel button (17) on the remote control
to select"CONT.MAX".
6.
Press the VOL.UP/DOWN button on the remote control
unitil the contrast step No. becomes "52".
7.
Receive a broadcast and check if the picture is normal.
2-11: Confirmation of Fixed Value (step No.)
Please check if the fixed values of each adjustment
item is set correctly referring below. (RF/AV)
NO.
STEP NO. NO.
FUNCTION
04
H VCO
04
14
BRIGHT MAX
140
15
50
BRIGHT MIN
16
25
CONT CENT
18
12
CONT MIN
20
COLOR MAX
74
TV
23
B
Fig. 2-3
FUNCTION
STEP NO.
21
COLOR MIN
00
23
SHARPNESS
53
24
FM LEVEL
00
27
SEPARATION
00
28
TEST MONO
00
29
TEST STEREO
00