Toshiba 14AF45 Instrukcja obsługi - Strona 13

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla TV Toshiba 14AF45. Toshiba 14AF45 32 stron. Toshiba color television owner's manual 14af45, 20af45
Również dla Toshiba 14AF45: Instrukcja serwisowa (50 strony)

Drukuj stronę
Toshiba 14AF45 Instrukcja obsługi

Adding channels to the TV's memory

When you press CH +/- on the remote control or CHANNEL
TV front panel, your TV will stop only on the channels stored in the
TV's channel memory. Follow the steps below to program channels into
the memory.

Programming channels automatically

Your TV can automatically detect all active channels and store them in
its memory. After the TV has stored the channels in its memory
automatically, you can add or erase specific channels manually.
To add channels automatically:
1. Press MENU, then press
2. Press
or
until the TV/CABLE
c
d
selection is highlighted.
3. Press
or
to highlight either TV
a
b
or CABLE, depending on which
you use.
If you use an antenna, choose TV.
If you use cable, choose CABLE.
4. Press
to select CH PROGRAM.
d
5. Press
or
to start channel programming. The TV will automatically
a
b
cycle through all the TV or Cable channels (depending on which you
selected), and store all active channels in the channel memory.
While the TV is cycling through the channels, the message
"PROGRAMMING NOW-PLEASE WAIT" appears.
6. When channel programming is complete, the message "COMPLETED"
appears.
7. Press CH + or – to view the programmed channels.

Adding and erasing channels manually

After you have programmed the channels automatically, you can add
or erase specific channels manually.
To add or erase channels manually:
1. Select the channel you want to add or erase.
If you are adding a channel, you must select the channel using the
Channel Number buttons.
2. Press MENU, then press
display the SETUP menu.
3. Press
or
to highlight ADD/
c
d
ERASE.
4. Press
or
to select ADD or
a
b
ERASE, whichever function you
want to perform.
5. Repeat steps 1–4 for other
channels you want to add or erase.

Changing channels

To change to the next programmed channel:
Press CHANNEL
c
remote control.
To change to a specific channel (programmed or unprogrammed):
Press the Channel Number buttons (0–9 and 100) on the remote
control.
For example, to select channel 125, press 100, 2, 5.
J3S00121A(E)_P07-13
or
to display the SETUP menu.
a
b
PICTURE AUDIO
TV / CABLE
CH PROGRAM
ADD / ERASE
SELECT
or
to
a
b
PICTURE AUDIO
TV / CABLE
CH PROGRAM
ADD / ERASE
SELECT
/
on the TV front panel or CH +/– on the
d
13
/
on the
c
d
CH
SETUP
OPTION
TV CABLE
START
ADD
ADJUST
CH
SETUP
OPTION
CABLE
START
ADD ERASE
ADJUST
13
13/01/2005, 5:41 PM
Channel
Numbers
Channel +/–
c d a b
Menu