Toshiba 19A10 Instrukcja serwisowa - Strona 15
Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla TV Toshiba 19A10. Toshiba 19A10 43 stron.
Drukuj stronęMTS ADJUSTMENT (FOR N7S CHASSIS)
No.
ITEM
1
ATTENUATOR
(ATT)
2
STEREO VCO
(STVC)
3
SAP VCO
(SAVC)
4
STEREO FILTER
(STRF)
5
SAP FILTER
(SAPF)
6
STEREO SEPARATION
(WBAN)
(SPEC)
INPUT SIGNAL
• 1kHz 30% mod. → ANT
terminal
• No signal
• 78.670kHz 147mVrms
→ pin 9 of H002
• Monaural signal → ANT
• 9.4kHz 600mVrm
→ pin 9 of H002
Monaural signal → ANT
• 88kHz 120mVrms
→ pin 9 of H002
• Monaural signal → ANT
• STEREO 300Hz R-channel
only → ANT
• STEREO 3kHz R-channel
only → ANT
– 14 –
ADJUSTMENT PROCEDURE
1. Connect rms meter to pin 12 of H002.
2. Display item ATT on screen.
3. Change data by Volume s/t buttons so
that output at pin 12 of H002 becomes
value as close as 142mVrms.
1. Display item STVC, and connect pin 9 of
H002 to ground.
2. Connect frequency counter to pin 12 of
H002.
3. Change data by Volume s/t buttons so
that the reading of counter becomes value
as close as 4fH (62.936kHz).
1. Display item SAVC.
2. Change data by Volume s/t buttons so
that the data becomes in the center of
range for STA7=0 and STA8=1.
SAVC
XXH
STA7:0 STA8:1
1. Display item STRF on screen.
2. Change data by Volume s/t buttons so
that the data becomes in the center of
range for STA3=1.
STRF
XXH
STA3:1
1. Display item SAPF.
2. Change data by Volume s/t buttons so
that the data becomes in the center of
range for STA4=1.
SAPF
XXH
STA4:1
1. Select "STEREO" mode from the MTS
function in the Audio menu.
2. Display item WBAN on screen.
3. Connect oscilloscope to pin 14 of H002.
4. Change data by Volume s/t buttons so
that 300Hz element on scope becomes
minimum.
5. Display item SPEC on screen.
6. Change data by Volume s/t buttons so
that 3kHz element on scope becomes
minimum.