Toshiba 19A30 Instrukcja serwisowa - Strona 20

Przeglądaj online lub pobierz pdf Instrukcja serwisowa dla TV Toshiba 19A30. Toshiba 19A30 43 stron.

Drukuj stronę
The channel memory is a list of TV channel numbers your TV will stop on when you press the CHANNEL s or t button.
First, use the TV/CABLE and CH PROGRAM functions to preset all active channels in your area.
If necessary, arrange the preset channels with the ADD/ERASE functions so that you can tune into only desired channels.
TV/CABLE function
1
Press POWER to turn on the TV.
2
Press MENU repeatedly until the Setup menu is dis-
played on the screen.
3
Press t or s repeatedly until "TV/CABLE" is displayed
in purple.
4
Press T or S until the mode that corresponds to your TV
signal system is displayed in purple.
TV: TV broadcasts signals.
(VHF channels 2 through 13 and UHF channels 14
through 69)
CABLE: Cable TV signals.
(Cable channels 1 through 125)
CH PROGRAM function
1
Press MENU repeatedly until the Setup menu is dis-
played on the screen.
2
Press s or t repeatedly until "CH PROGRAM" is
displayed in purple.
3
Press T or S to start channel programming.
The TV will automatically cycle through all the TV or
CABLE channels depending on the mode selected, and
store active channels in the channel memory.
4
When channel programming is complete, you will see
the message on the screen.
5
Press CHANNEL s or t to make sure the channel
programming has been done properly.

PROGRAMMING CHANNEL MEMORY

– 19 –
ADD/ERASE function
After performing the CH PROGRAM function, you can add
or erase specific channels.
1
Select the channel you want to erase using the CHAN-
NEL s or t button, or select the channel you want to
add using the Channel Number buttons.
2
Press MENU repeatedly until the Setup menu is dis-
played on the screen.
3
Press t or s repeatedly until "ADD/ERASE" is dis-
played in purple.
4
Press T or S :
To erase the channel
Press the button until "ERASE" is displayed in purple
indicating that the channel has been erased from the
memory.
To add the channel
Press the button until "ADD" is displayed in purple
indicating that the channel has been memorized.
5
Repeat steps 1 to 4 for other channels.
You have now completed the channel programming.