Toshiba 20A44 Instrukcja obsługi - Strona 11

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla TV Toshiba 20A44. Toshiba 20A44 33 stron. Toshiba color television owner's manual 20a44
Również dla Toshiba 20A44: Instrukcja serwisowa (4 strony), Instrukcja serwisowa (41 strony)

Drukuj stronę

SELECTING STEREO/SAP BROADCASTS

You can listen to high-fidelity stereo sound with the Multi-channel

TV Sound (MTS) feature. MTS can also transmit a second audio

program (SAP) containing a second language or other audio

information.

When the TV receives a stereo or SAP broadcast, the word

STEREO or SAP appears on-screen every time the TV is turned

on, the channel is changed, or RECALL is pressed.

The MTS feature is not available in the VIDEO mode.

You can leave your TV in STEREO mode because it will

automatically output stereo or monaural sound, depending on

the broadcast type. If the stereo sound is noisy, select MONO to

reduce the noise. The word STEREO or SAP is displayed in

light blue when the TV receives the signal.

SETTING THE V-CHIP

The V-Chip function is available only for the U. S. V-Chip system. The Canadian V-Chip system is not supported.

This TV is fitted with a V-CHIP controller that provides you with channel viewing access controls and restrictions. This function is to

prevent your children from watching violent or sexual scenes that you may choose to exclude.

Press MENU and then SET + or – until the indicator next

to "V-CHIP SET" begins to flash, then press ENTER.

Enter your password (4 digits) using the Direct channel

selection buttons (0–9).

In the event of entering an incorrect password press

RESET and re-enter the correct password. Then press

ENTER.

Enter the password again, and then press ENTER.

Press SET + or – until the indicator next to "V-CHIP"

begins to flash.

Press ENTER to select ON.

Press SET + or – until the indicator next to "TV RATING" or

"MPAA RATING" begins to flash. Press ENTER.

Press SET + or – to select the desired rating for the

applicable video or TV channel. Press ENTER.

Press MENU repeatedly until the menu screen is cleared.

NOTES:

• V-Chip function is based on specifications for the United States and therefore may not work properly in Canada.

• If you want to change your password, follow steps 1 and 2 and select "CHANGE PASSWORD" option. Then enter your new

password.

• The V-Chip function is activated only on programs and tapes that have the rating signal.

• Once you block a program using the V-Chip function, the blocked program cannot be watched based on the content of the

show. When the program starts, the "INPUT PASSWORD" will appear on the screen. When you want to release the V-Chip

temporarily, enter the password.

If you change the channel or turn off the TV while the V-Chip function was temporarily released, the original setting will be

resumed. If you return to the channel you were watching you must re-enter your password to temporarily release your V-Chip

function again.

• When you watch the TV using a cable box or a VCR and the TV is tuned to channel 3 or 4, you must release the V-Chip

temporarily. The V-Chip setting will not be resumed until you turn off the TV. The TV channel is not used in this case.

• When changing the channel with the cable box or the VCR, approximately 10 seconds will pass until the program appears.

• If you forget or lose your password, you can reset it using the following procedure:

- While holding down the VOLUME D button on the TV, press "0" on the remote control for a few seconds.

3M91301A-E P08-11

TO SELECT THE DESIRED MTS SETTING:

Repeatedly press MTS to select either STEREO, SAP,

MONO+SAP, or MONO. If the current program is not available

in stereo or SAP, the setting will not be available when you

press MTS.

STEREO

MONO

If the current program is not broadcasting either stereo or SAP,

those settings will not be available when you press MTS.

TV RATING

SET –

TV-Y

TV-Y7

TV-G

OFF

TV-Y: All children

TV-Y7: 7 years old and above

TV-G: Children's program

When you select TV-Y7, TV-PG, TV-14 or TV-MA, press RECALL to

explain the rating.

Press SET + or – to select the desired rating you want. Press ENTER to

select the setting ON or OFF.

MPAA RATING

SET –

OFF

PG-13

G: All ages

PG: Parental guidance

PG-13: Parental guidance less

than 13 years old

13/2/04, 2:07

SAP

MONO + SAP

SET +

TV-PG

TV-14

TV-MA

TV-PG: Parental guidance

TV-14: 14 years old and above

TV-MA: 17 years old and above

SET +

NC-17

R: Under 17 years old parental

guidance suggested

NC-17: 17 years old and above

X: Adult only