Epson PowerLite Pro G6750WU Instrukcja obsługi - Strona 35

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Oprogramowanie Epson PowerLite Pro G6750WU. Epson PowerLite Pro G6750WU 49 stron. 3lcd projector
Również dla Epson PowerLite Pro G6750WU: Instrukcja obsługi (48 strony), Instrukcja obsługi (47 strony), Skrócona instrukcja obsługi (7 strony), Podręcznik instalacji (3 strony)

Solving Problems

Cannot connect the projector and the computer via wired LAN

Check

Is the network cable connected correctly?

Are the computer's LAN card and the built-in LAN function

available?

Is the DHCP function for Wired LAN turned On?

Are connection denial functions, such as MAC Address

restrictions and port restrictions, set correctly at the

access point?

Are the IP address, the subnet mask, and the gateway

address for the access point and the projector set

correctly?

Check

Is the Network Configuration screen displayed on the

projector?

Is the firewall turned off, or has the firewall been

registered as an exception?

Was the network adapter being used selected correctly

with EasyMP Multi PC Projection?

Check that the network cable is securely connected.

Check that LAN is valid by checking the device manager under Control Panel - System - Hardware.

Turn off the DHCP setting for Wired LAN from the Configuration Menu before connecting.

When DHCP is set to ON in Advanced connection mode, if an available DHCP server is not found, it

may take a while to enter LAN standby status.

See your projector User's Guide for details on the projector's wired LAN settings.

Set the projector to allow connections from the access point.

When not using a DHCP, adjust each setting.

Close network settings on the projector, and return to the LAN standby screen. If the Network

Configuration screen is displayed on the projector, you cannot connect using EasyMP Multi PC

Projection.

When you do not wish to turn off the firewall or register the firewall as an exception, make the

necessary settings to open the ports.

The ports used by EasyMP Multi PC Projection are "3620", "3621", and "3629".

If the computer has multiple LAN environments, it cannot connect unless the network adapter is

selected correctly. When using a computer running Windows, start EasyMP Multi PC Projection, and

select the network adapter you are using from Switch LAN in Set options.

s "General Settings Tab"

p.44

Remedy