Epson Stylus Pro - Stylus Color Pro Ink Jet Printer Arkusz specyfikacji - Strona 3
Przeglądaj online lub pobierz pdf Arkusz specyfikacji dla Oprogramowanie Epson Stylus Pro - Stylus Color Pro Ink Jet Printer. Epson Stylus Pro - Stylus Color Pro Ink Jet Printer 15 stron. Macintosh & macintosh power pc version 3.1 for stylus color/pro/pro xl
Również dla Epson Stylus Pro - Stylus Color Pro Ink Jet Printer: Arkusz specyfikacji (1 strony), Instrukcja instalacji i obsługi (44 strony)
Drukuj stronę
Color ink cartridge (S020036):
Colors
Cyan, magenta, and yellow
Print capacity* In each color, approximately 1.2 million
characters (670 sheets/color, letter, 5%
duty at 360 dpi)
Cartridge life*
2 years from production date and up to
6 months after opening the package at
77° F (25° C); based on letter size paper
Temperature
Storage:
Transit:
Freezing:** 21.2° F ( 6° C)
Dimensions
2.1 inches (W) 2.7 inches (D) 1.7 inches (H)
(54 mm 67.4 mm 41.8 mm)
*
The cartridge life may vary. If you often print large graphics and dense
text, you will use up ink cartridges faster than if you print pages with
less ink coverage. Cleaning the print heads more often than
necessary will also consume ink.
** The ink thaws in approximately 2 hours at 77°F (25°C).
Caution:
c
Use only genuine EPSON ink cartridges and do not refill
them. Other products may cause damage to your printer
that is not covered by EPSON's warranties.
Do not use an ink cartridge after the expiration date on the
package.
Mechanical
Paper feed method: Friction with auto sheet feeder
Print head life:
1 billion dots per nozzle
Total print volume: 75,000 pages
Dimensions and
Stylus Pro
weight:
Width
Depth
Height 7.2 inches (182 mm)
Weight 16.7 lb (7.5 kg)
Stylus Pro XL
Width
Depth
Height 7.2 inches (182 mm)
Weight 22.1 lb (10 kg)
Ink Jet Printers
22 to 104° F ( 30 to 40° C)
1 month at 104° F (40° C)
22 to 140° F ( 30 to 60° C)
1 month at 104° F (40° C)
120 hours at 140° F (60° C)
19.0 inches (482 mm)
20.9 inches (530 mm)
22.8 inches (580 mm)
23.5 inches (597 mm)
Electrical
Input voltage
range:
Rated frequency
range:
Input frequency
range:
Rated current:
Power
consumption:
Environmental
Temperature:
Humidity:
Safety Approvals
Safety standards:
R.F.I.:
Fonts
The printer comes with an installed set of fonts, which are
selectable with the Font button on the control panel.
However, the printer always uses the fonts selected through
the software program. The only time you need to select the
printer's installed fonts is when the software program does
not allow you to select fonts.
Interface Specifications
The printer is equipped with an 8-bit parallel interface and a
serial interface.
Parallel Interface
Data format:
Synchronization:
Handshake timing: BUSY and ACKNLG signals
Signal level:
Connector:
8/1/95
EPSON Stylus Pro and Pro XL
103.5 to 132 V
50 to 60 Hz
49.5 to 60.5 Hz
0.6 A
Approx. 20 W (during self test,
LQ at 10 cpi)
Operation 50 to 95° F (10 to 35° C)
Storage*
–4 to 140° F ( 20 to 60° C)
1 month at 104° F (40° C)
120 hours at 140° F (60° C)
Operation 20 to 80% RH
Storage*
5 to 85% RH
(without condensation)
*
Stored in shipping container
UL 1950 with D3, CSA 22.2 950 with D3
FCC part 15 subpart B class B
8-bit parallel, IEEE P1284 mode
compatible
STROBE pulse
TTL compatible
36-pin, Centronics compatible
EPSON Stylus Pro and Pro XL-3