Source Settings, Other Controls
Confi guring Source Settings
You can enables or disable selected source options.
The TV will not switch to the disabled source options
when SOURCE button is pressed.
•
Select
Sources in the Settings menu and press
OK button.
•
Press
Up or Down buttons to select a source.
•
Use
Left or Right button to enable or disable the
selected source. Changes are automatically stored.
Input Selection
Use the Input Selection window if the television
does not switch over to a connected source
automatically.
• Press
button on your remote control for
SOURCE
directly changing sources. Select settings tab and then
use Up or Down to select Source. Press OK button.
Use then Up or Down button to highlight an input and
press Right button to select.
40BV701B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10073323.indd 34
40BV701B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10073323.indd 34
Confi guring Other Settings - General
You can confi gure the settings of your TV. Select
Confi guration from Setup menu and press OK to view
this menu. Press the BACK button on the remote
control to exit.
To view general confi guration preferences, select
Other Settings in the Settings menu and press OK
button.
Operation
•
Press
Up or Down buttons to select an item.
•
Use
Left or Right button to set an option.
•
Press
OK button to view a sub-menu.
Menu Timeout
Press MENU button and select Settings by using Left
or Right button. Press OK button to continue. Use Up
or Down button to select Other Settings and then
press OK button. Select Menu Timeout using Up or
Down button and use Left or Right button to set a
specifi c display timeout for menu screens.
Scan Encrypted
Press MENU button and select settings by using Left
or Right button. Press OK to continue. Use Up or
Down to select others settings and then press OK.
Select Scan Encrypted using Up or Down buttons
and use Left or Right to set. When this setting is on,
search process will locate the encrypted channels as
well. If it is set as OFF manually, encrypted channels
will not be located while in automatic search or manual
search. Scan Encrypted Channel feature will always
be ON after performing first time installation.
- 34 -
03.10.2011 19:02:11
03.10.2011 19:02:11
Drukuj stronę