Epson Stylus pro 3800 portrait edition Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Oprogramowanie Epson Stylus pro 3800 portrait edition. Epson Stylus pro 3800 portrait edition 4 stron. Fill, refill or use refillable cartridges
Również dla Epson Stylus pro 3800 portrait edition: Podręcznik (49 strony), Podręcznik użytkownika (19 strony), Pierwsze kroki (13 strony), Broszura i specyfikacje (8 strony), Podręcznik Start Here (6 strony), Ograniczona gwarancja (12 strony), Zawiadomienie (1 strony), Broszura (6 strony), Specyfikacje (12 strony), Podręcznik (3 strony), Zacznij tutaj (2 strony)

Drukuj stronę
Epson Stylus pro 3800 portrait edition Instrukcja instalacji

Getting Started

Before setting up the ExpressDigital Darkroom Core
software, see the Epson
your Epson Stylus
To install the software, insert the CD into your CD or DVD drive and follow the
on-screen instructions.

Configuring Your Printer

Once the Darkroom Core Edition for Epson software is installed, make sure your
Epson Stylus Pro Portrait Edition printer is turned on and connected to your
computer. Then follow the steps below to enable and configure the printer.
1. Double-click the
2. Click the
Setup
3. Select
Printer Options
.
printer
4. On the Main tab, make sure that the
checked, then select the Paper Type, Paper Source, and Paper Size settings that
match the paper you have loaded in the printer.
5. Click the
Advanced
Automatic - Choose output profile based on paper type
6. When you have finished selecting printer settings, click
software window.
If you would like to print black and white photos, see the next section to
reconfigure your Printer Options in the Darkroom Core Edition for Epson
software. When you're finished configuring your printer, see "Finishing the
Installation" on the next page.
1
Getting Started
®
Start Here poster or Printer Guide to set up and install
®
Pro Portrait Edition printer using a USB connection.
Darkroom Core Edition for Epson
tab at the bottom of the software window.
, select your printer in the list, then click
tab and make sure that Profile Settings is set to
Edition for Epson
TM
icon on your desktop.
Enable this printer
OK
configure
checkbox is
.
to return to the