Epson Stylus Pro 4800 Portrait Edition Skrócona instrukcja obsługi - Strona 2

Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Oprogramowanie Epson Stylus Pro 4800 Portrait Edition. Epson Stylus Pro 4800 Portrait Edition 12 stron. Stylus pro 800 series
Również dla Epson Stylus Pro 4800 Portrait Edition: Instrukcja konfiguracji (15 strony), Broszura i specyfikacje (8 strony), Podręcznik dla początkujących (10 strony), Podręcznik (17 strony), Ważne informacje (2 strony), Ograniczona gwarancja (12 strony), Broszura i specyfikacje (6 strony), Instrukcja instalacji (4 strony), Broszura i specyfikacje (16 strony)

Loading Roll Paper

Slide the black paper stop off the end of

the spindle.

Note:To use paper with a 2-inch core, remove the

gray adapters from the paper stops at each end.

See your Printer Guide for details.

Position the roll as shown, then slide it onto

the spindle.

Slide the black paper stop back onto the spindle and

insert it ﬁrmly into the end of the roll.

Open the roll paper cover.

Place the roll paper in the printer as shown. (The

black end of the spindle goes on the left.)

Make sure the printer is turned on, then press the

Paper Source button until the

appears.

icon

Release the paper lever.

Hold both sides of the paper and feed it into

the slot. Pull it all the way to the end of the

paper tray.

Using the end of the spindle, roll the paper

until it is aligned with the mark next to the

arrow. Then return the paper lever to the

secured position.

The printer automatically feeds the paper to the

printing position.

Raise the roll paper support on top of the

paper tray. Then close the roll paper cover.

Caution:To prevent creasing the paper, remove it

from the paper path and roll it up when you're not

printing.

Alignment mark