Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst Instrukcja obsługi dla sieci - Strona 43

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla sieci dla Oprogramowanie Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst. Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst 46 stron. Warranty statement
Również dla Epson Stylus Pro 4880 ColorBurst Edition - Stylus Pro 4880 ColorBurst: Arkusz specyfikacji (6 strony), Pierwsze kroki (13 strony), Broszura i specyfikacje (6 strony), Instrukcja konfiguracji (16 strony), Skrócona instrukcja obsługi (12 strony), Instrukcja instalacji (4 strony), Podręcznik z informacjami o produkcie (16 strony), Ograniczona gwarancja (12 strony)

1. From the command line, type:

Example: arp -s 192.168.100.201 00-00-48-93-00-00

2. Execute the ping command to set the IP address by pinging it: Example:

ping 192.168.100.201

3. The network interface should now respond to the ping. If it does not, you may have

incorrectly typed the MAC address or the IP address in the arp -s command.

Double-check and try again. If none of these actions are effective, re-initialize the

network interface and try again.

4. Print a status sheet to check whether the new IP address has been assigned to the

network interface.

Note:

When the IP address is set by the ping command, the subnet mask is automatically changed

by the class of the IP address. To change the subnet mask and the default gateway according

to your network environment, use EpsonNet Config for Windows or Macintosh.

Uninstalling Software

Follow the steps below to uninstall the network software.

1. Click Start, click Control Panel, and then click Uninstall a program.

2. Select the utility you want to uninstall, and then click the Uninstall/Change button.

3. Follow the on-screen instructions to complete uninstallation.

1. Click Start, click Control Panel, and then click Add or Remove Programs.

2. Click the Change or Remove Programs icon.

3. Select the utility you want to uninstall, and then click the Change/Remove button.

4. Follow the on-screen instructions to complete uninstallation.

Tips for Administrator