Epson Stylus Pro 7600 Photographic Dye Ink Instrukcja rozpakowywania i konfiguracji - Strona 4

Przeglądaj online lub pobierz pdf Instrukcja rozpakowywania i konfiguracji dla Oprogramowanie Epson Stylus Pro 7600 Photographic Dye Ink. Epson Stylus Pro 7600 Photographic Dye Ink 24 stron. Epson stylus pro 7600: brochure
Również dla Epson Stylus Pro 7600 Photographic Dye Ink: Broszura i specyfikacje (24 strony), Podręcznik informacyjny (16 strony), Specyfikacje (4 strony), Instrukcja szybkiej instalacji (34 strony), Informacje o produkcie (15 strony), Skrócona instrukcja obsługi (11 strony), Gwarancja (8 strony), Broszura i specyfikacje (8 strony), Broszura i specyfikacje (16 strony), Podręcznik referencyjny produktu (28 strony), Aktualizacja instrukcji (4 strony)

Drukuj stronę
Epson Stylus Pro 7600 Photographic Dye Ink Instrukcja rozpakowywania i konfiguracji
For United Kingdom Users
Use of options
EPSON (UK) Limited shall not be liable against
any damages or problems arising from the use of
any options or consumable products other than
those designated as Original EPSON Products or
EPSON Approved Products by EPSON (UK)
Limited.
Safety Information
w
Warning:
This appliance must be earthed. Refer to rating
plate for voltage and check that the appliance
voltage corresponds to the supply voltage.
Important:
The wires in the mains lead fitted to this appliance are
coloured in accordance with the following code:
Green and yellow - Earth
Blue - Neutral
Brown - Live
If you have to fit a plug:
As the colours of the mains lead of this appliance
may not match coloured markings used to
identify the terminals in a plug, please proceed as
follows:
The green and yellow wire must be connected to
the terminal in the plug which is marked with the
letter E or earth symbol (G).
The blue wire must be connected to the terminal
in the plug marked with the letter N.
The brown wire must be connected to the terminal
in the plug marked with the letter L.
If damage occurs to the plug, replace the cord set
or consult a qualified electrician.
Replace fuses only with a fuse of the correct size
and rating.
2
Warnings, Cautions, and Notes
w
Warnings must be followed carefully to avoid
bodily injury.
c
Cautions must be observed to avoid damage to
your equipment.
Notes contain important information and useful tips
on the operation of your printer.
Unpacking and Assembling
Stylus Pro 9600
Choosing a Place for the Printer
Leave adequate room for easy operation,
maintenance and ventilation.
Leave at least 20 cm between the back of the
printer and the wall.
Choose a location that can hold the printer
weight (about 84 kg with base unit).
Make sure the surface is flat and stable.
Use a grounded power outlet; do not use a
damaged or frayed power cord. Avoid using
an outlet that is shared with other appliances.
Use only an outlet that meets the power
requirements of this printer.