MSI Whitebook MS-1013 Instrukcja instalacji - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Laptop MSI Whitebook MS-1013. MSI Whitebook MS-1013 30 stron. 12,1" wxga notebook

2-3 Pull the lever sideways away from the socket. Make sure to raise the lever up to a 90-degree angle,

as shown in figure 2-3d below. You should be able to lift the CPU easily. Look for the gold arrow on the

CPU. The gold arrow should point as shown in the picture. The CPU can only fit in the correct orientation.

Hint: Make sure your system can accommodate the Socket 754 AMD Mobile Sempron™/Mobile Athlon

64™/ Turion 64™ Processor that you want to install. Check for motherboard, BIOS, and thermal

compatibility by using the given documentation, or by contacting the vendor if necessary. This processor

should only be installed in systems supporting the Mobile AMD Processors.

2-4 Place new processor into the socket. Align processor's pin A1 (shown in figure 2-4) with the arrow on

the socket 754. Pin A1 of the processor is identified with an embroidered corner and pin A1 of the socket

is identified with a small arrow. If the CPU is correctly installed, the pins should be completely embedded

into the socket and cannot be seen. Please note that any violation of the correct installation procedures

may cause permanent damages to your mainboard.