Philips Signage Solutions BDL4254ET Podręcznik użytkownika - Strona 31
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Monitor Philips Signage Solutions BDL4254ET. Philips Signage Solutions BDL4254ET 39 stron. 42" edge led backlight full hd optical imaging, 5 touchpoints multi-touch display
Również dla Philips Signage Solutions BDL4254ET: Specyfikacje (3 strony), Skrócona instrukcja obsługi (2 strony)
BDL4254ET
• {PC sources only} – Search order: Displayport DVI-D VGA
HDMI Card OPS (for supported OPS models)
• {Video sources only} – Search order: HDMI Component
Composite .
• {Failover}
-
Failover 1: User-defined setting. Default:HDMI.
-
Failover 2: User-defined setting. Default:HDMI.
-
Failover 3: User-defined setting. Default:HDMI.
-
Failover 4: User-defined setting. Default:HDMI.
-
Failover 5: User-defined setting. Default:HDMI.
-
Failover 6: User-defined setting. Default:HDMI.
-
Failover 7: User-defined setting. Default:HDMI.
APM (Advanced Power Management)
Turn on or off the automatic power management setting.
• {Off} – Shutdown power directly if no signal detected. (Default)
• {On} – Enter power saving mode if no signal detected.
OPS settings
Set the OPS configuration under each power condition.
• {Auto} – After selecting {Card OPS} for video source input, the
OPS will be set to off when the display power is set to off, or set to
on when the display power is set to on. When set to other video
source inputs, the OPS will always be set to on.
• {Always off} – The OPS will always be set to off.
• {Always on} – The OPS will always be set to on.
Advanced option reset
Picture
Date and time
Screen
Schecule
Monitor
Audio
DDC/CI
PIP
HDMI with One Wire
Smart power
Configuration1
Auto signal detection
Configuration2
APM
OPS settings
Advanced option
Advanced option reset
Reset all settings in the Advanced option menu to factory preset values.
1. Press [SET] or [ ] button to enter the submenu.
2. Press [ ] or [ ] button to select {Reset} and press the [SET]
button to restore settings to factory preset values.
3. Press the [EXIT] button or select {Cancel} and press the [SET]
button to cancel and then return to the previous menu.
Action
Action
Action
On
Off
Off
Action
Off
Always on
Action
22