Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C Podręcznik - Strona 7
Przeglądaj online lub pobierz pdf Podręcznik dla System stereo Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C. Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C 31 stron. 3 cd changer with dolby® pro logic processor, five loudspeakers, 320 watts total power
Również dla Philips 3 CD CHANGER WITH DOLBY PRO LOGIC PROCESSOR FWP88C: Podręcznik użytkownika (31 strony), Specyfikacje (2 strony)
Drukuj stronę
All manuals and user guides at all-guides.com
CAUTION:
– For optimal sound performance, it is
recommended to use the supplied
speakers.
– Do not connect more than one speaker
to any one pair of + / - speaker
terminal.
– Do not connect speakers with
impedance lower than the speakers
supplied. Please refer to
SPECIFICATION section of this manual.
D Rear Surround Speakers'
Connection
Connect the black (non-marked) wires to
the black REAR SURROUND terminals and
the colored (marked) wires to the grey
REAR SURROUND terminals.
E Center Speaker
Connection
Connect the black (non-marked) wires to
the black CENTER terminal and the blue
(marked wires) to the blue CENTER
terminal.
pg 01-31/P88/22-Eng
7
F Line Out Connection
H Subwoofer Out Connection
(wireless
Connect the optional active subwoofer to
ready)
the SUBWOOFER OUT terminal. The
You can connect the audio left and right
subwoofer reproduces just the low bass
LINE OUT terminals to a optional CD
sound effect (e.g. explosions, the rumble of
Recorder ANALOG IN terminals. This
spaceships, etc.). Be sure to follow the
allows you to record in an analogue format.
instructions supplied with the subwoofer.
You can also install additional optional
front active speakers away from the
I Wireless Surround Out
system (e.g. in another room) to reduce the
inconvenience of running long speaker
You may connect transmitter unit of the
wires across rooms. You can place as many
wireless rear speakers (not supplied) to the
remote speakers as you like provided they
SURROUND OUT terminal.
operate at the same radio frequency.
Connect the wireless radio frequency
Note:
transmitter to the LINE OUT terminals.
– Availability of wireless transmitter and
Place the active speakers at your preferred
its peripherals are subjected to the
location. Be sure to follow the instructions
approval of local authorities. Please
supplied with the active speakers.
check with respective local safety or
approving authority.
G Connecting other
equipment to your system
J Digital Out Connection
You can connect the audio left and right
You can record the digital sound from the
OUT terminals of a TV, VCR, Laser Disc
CD, through this output, on any audio
player, DVD player or CD Recorder to the
equipment with digital input (e.g. CD
AUX/CDR IN terminals at the rear of the
Recorder, Digital Audio Tape (DAT) deck,
system.
Digital to Analog Converter and Digital
Signal Processor).
Connect one end of the cinch cable (not
supplied) to the DIGITAL OUT socket and
the other end to the audio equipment with
digital input.When connecting the cinch
cable, make sure it is fully inserted.
K AC Power Supply
After all other connections have been
made, connect the AC power cord to the
system and to the wall outlet.
Inserting batteries into the
Remote Control
• Insert the batteries (Type R06 or AA)
Connection
into the remote control as shown in the
battery compartment.
• To avoid damage from possible battery
leakage, remove dead batteries or
batteries that will not be used for a long
time. For replacement, use type R06 or
AA batteries.
3/6/00, 1:26 PM
PREPARATION
7
3139 116 19721