Epson Stylus Scan 2000 Podręcznik użytkownika - Strona 19

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Oprogramowanie Epson Stylus Scan 2000. Epson Stylus Scan 2000 24 stron. Scanning application force quits on mac os 10.4 release of twain pro driver 2.10a;
Również dla Epson Stylus Scan 2000: Podręcznik użytkownika (7 strony), Karta informacyjna produktu (4 strony), Szybki start (4 strony), Podręcznik z informacjami o produkcie (13 strony), Karta informacyjna produktu (4 strony), Biuletyn wsparcia produktu (12 strony), Specyfikacja (2 strony), Podręcznik (11 strony), Biuletyn wsparcia produktu (3 strony), Biuletyn wsparcia produktu (14 strony), Podręcznik (35 strony), Podręcznik online (10 strony)

Checking the Stylus Scan

Before using your EPSON Stylus Scan, make sure it is working correctly by printing

a nozzle check pattern. You may also need to clean the print head.

Follow the steps below to load A4 size plain paper in the sheet feeder. The Stylus Scan

prints onto this paper when printing and making copies.

Lower the output tray and slide out the extension. Next, slide the paper edge guide

to adjust the width of the loading area so that it is slightly wider than the width of

your paper.

paper edge guide

output tray

Fan a stack of paper; then tap it on a flat surface to even the edges.

Load the stack of paper with the printable side up and the right edge of the paper

resting against the right side of the sheet feeder. Then slide the edge guide against

the edge of the paper.

Note:

Always load paper into the sheet feeder short edge first.

Make sure the paper stack fits under the arrow mark inside the edge guide.

Follow the on-screen instructions to check the print-head nozzles. If you do not see any

on-screen instructions, follow these instructions.

Checking the Stylus Scan

printable side up