Philips 7000 series Podręcznik użytkownika - Strona 16

Drukuj stronę

Philips 7000 series Podręcznik użytkownika

I hear but cannot control music on my

Bluetooth device (e.g. play/pause/skip

forward/backward).

Make sure the Bluetooth audio source

supports AVRCP (see 'Technical data' on

page 10).

The volume level of the earpieces is toot

low.

Some Bluetooth devices cannot link the

volume level with the earpieces through

volume sync. In this case, you have to

adjust the volume on your Bluetooth

device independently to achieve an

appropriate volume level.

I cannot connect the earpieces to another

device, what do I do?

•

make sure the Bluetooth function of

the previous paired device is turned

o .

•

Repeat the pairing procedure on your

second device (see 'Pair the earpieces

with your Bluetooth device at the

rst time' on page 6).

I hear sound from only one earpieces.

•

If you are in a call, it is normal that

sound comes from the right and left

earpieces.

•

If you are listening to music but sound

only comes from one earpieces:

•

The other earpieces may be out of

battery. For optimal performance,

charge both earpieces fully.

•

The right and left earpiecess are

disconnected from each other,

Turn o both earpieces rst. Then

put both earpiecess back to

charging case for 5 seconds and

take them out. This will turn the

earpiecess on and connect the

two earpiecess. Reconnect the

earpieces to your Bluetooth

device.

•

The earpieces is connected to

more than one Bluetooth device.

Switch o the Bluetooth function

of all connected devices. Turn o

both earpiecess. Put both

earpiecess back to charging case

for 5 seconds and take them out.

Reconnect the earpieces to your

Bluetooth device. Note that the

earpieces is desighed for

connecting to only one Bluetooth

device ath a time. When you

reconnect the earpieces to your

Bluetooth device, make sure the

Bluetooth function of any other

Previously paired/connected

devices are o .

•

If the above solutions do not help,

factory reset the earpieces (see

'Factory reset the earpieces' on

page 9).

For further support, visit