Philips 7000 series Podręcznik użytkownika - Strona 4

Drukuj stronę

Philips 7000 series Podręcznik użytkownika

•

To avoid potential damage, for

example the panel peeling from the

bezel, ensure that the monitor does

not tilt downward by more than -5

degrees. If the -5 degree downward

tilt angle maximum is exceeded, the

monitor damage will not be covered

under warranty.

•

Do not knock or drop the monitor

during operation or transportation.

•

The USB Type-C port could only be

connected to specify equipment

with fire enclosure in compliance

with IEC 62368-1 or IEC 60950-1.

•

Excessive usage of monitor can cause

eye discomfort, it's better to take

shorter breaks more often at your

workstation than longer breaks

and less often; for example a 5-10

minute break after 50-60-minute

continuous screen use is likely to

be better than a 15-minute break

every two hours. Try to keep your

eyes from eye strain while using the

screen for a constant period of time

by :

• Looking at something varying

distances after a long period

focusing on the screen.

• Conscious Blinking often while

you work.

• Gently closing and rolling your

eyes to relax.

• Reposition your screen to appro-

priate height and angle accord-

ing to your height.

• Adjusting the brightness and

contrast to appropriate level.

• Adjusting the environment light-

ing similar to that of your screen

brightness, avoid the fluorescent

lighting, and surfaces that don't

reflect too much light.

• Seeing a doctor if your symp-

toms.

Maintenance

•

To protect your monitor from

possible damage, do not put

excessive pressure on the LCD panel.

When moving your monitor, grasp

the frame to lift; do not lift the

monitor by placing your hand or

fingers on the LCD panel.

•

Oil-based cleaning solutions may

damage the plastic parts and void

the warranty.

•

Unplug the monitor if you are not

going to use it for an extensive

period of time.

•

Unplug the monitor if you need to

clean it with a slightly damp cloth.

The screen may be wiped with a

dry cloth when the power is off.

However, never use organic solvent,

such as, alcohol, or ammonia-based

liquids to clean your monitor.

•

To avoid the risk of shock or

permanent damage to the set, do

not expose the monitor to dust,

rain, water, or excessive moisture

environment.

•

If your monitor gets wet, wipe it

with dry cloth as soon as possible.

•

If foreign substance or water gets in

your monitor, please turn the power

off immediately and disconnect

the power cord. Then, remove the

foreign substance or water, and send

it to the maintenance center.

•

Do not store or use the monitor in

locations exposed to heat, direct

sunlight or extreme cold.

•

In order to maintain the best

performance of your monitor and

use it for a longer lifetime, please

use the monitor in a location

that falls within the following

temperature and humidity ranges.