Finding a passage within a
track
1 During playback, press and hold down
∞ or §.
➜ The disc is played at high speed and low
volume.
2 When you recognize the passage you want,
release ∞ or §.
➜ Normal playback resumes.
Programming tracks
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1 In the stop position, press PROG to activate
programming.
➜ Display shows P01 indicating the start of
the program and PROG flashes. (See 6)
2 Press ∞ or § to select your desired track
number.
For MP3-CD/WMA: First press
ALBUM+/- once or more to find your album.
3 Press PROG to store the desired track.
➜ Display shows P02, indicating the next
program location available.
4 Repeat steps 2 to 3 to select and store all
desired tracks.
5 Press 2; to play the program.
To review your program
In the stop position, press and hold PROG 3
seconds.
➜ The display shows all the stored tracks in
sequence.
Helpful hints:
–
Display shows P01 if no track is
programmed.
–
If you try to store more than 20 tracks, no
track can be stored and the display will show
--- with "PROG" .
To erase a program
You can erase a program by:
– pressing 9 (twice during playback or once
in the stop position);
– selecting FM, MW or OFF position;
– opening the disc door.
➜ Display: PROG disappears.
Selecting different play
modes (See 7)
You can select and change the various play
modes before or during playback, and
combine REP or REP ALL play modes with
PROG.
REP – plays the current track continuously.
REP ALL – plays the entire disc/program
continuously.
SHUF – plays all tracks in random order
(not available with PROG).
1 To select play modes, press MODE once or
more.
2 Press 2; to start playback if in the stop
position.
3 To select normal playback, press MODE
repeatedly until the various modes are no
longer displayed.
– You can also press 9 to cancel your play
modes.
Drukuj stronę