Toshiba SD-185 Instrukcja obsługi - Strona 8
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz DVD Toshiba SD-185. Toshiba SD-185 27 stron. Toshiba dvd player user manual
Drukuj stronę
Connections
Connecting to television
IMPORTANT!
– You only need to make one video connection
from the following options, depending on the
capabilities of your television.
– Connect the DVD player directly to the
television.
Using SCART socket
MAINS
Use the scart cable to connect the DVD SCART OUT
A
to the corresponding scart input socket on the TV
(cable not supplied).
If your DVD player will not be connected to a Stereo
System or AV Receiver to hear better sound, scart is
enough for both audio and video connections.
Using Composite Video Jack(CVBS)
Use the composite video cable (yellow) to connect
A
the DVD player' s VIDEO(CVBS) jack to the video
input jack(or labelled as A/V in,Video In or
Composite) on the TV(cable not supplied).
To hear the sound of this DVD player through your
Helpful hint: Before making or changing any connections, make sure that all the devices are
disconnected from the power outlet.
TV, use the audio cables(white/red)to connect
AUDIO OUT(L/R)jacks of the DVD player to
corresponding AUDIO IN jacks on the TV(cable
not supplied).
Using Component Video Jacks(Y, P
IMPORTANT!
-The progressive scan video quality is only
possible when using Y, P
scan TV is required.
Use the component video cables (red/blue/green) to
A
connect the DVD player' s Y, P
corresponding Component video input jacks (or
labelled as Y, P
P
) on the TV (cable not supplied).
b,
r
Use the audio cables (white/red) to connect AUDIO
B
OUT (L/R) jacks of the DVD player to the
corresponding AUDIO IN jacks on the TV(cable not
supplied).
Proceed to page 12 for detailed Progressive Scan set
C
up.
Using a RF modulator
, P
)
B
R
P
and a progressive
B,
R
P
jacks to the
B,
R