Philips AZ783 Podręcznik użytkownika - Strona 13
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System stereo Philips AZ783. Philips AZ783 16 stron.
Również dla Philips AZ783: Skrócona instrukcja obsługi (4 strony)
Drukuj stronę•
File name in Unicode UTF8 (maximum
length: 128 bytes)
Unsupported formats:
•
Empty albums: an empty album is an album
that does not contain MP3/WMA files, and
is not be shown in the display.
•
Unsupported file formats are skipped. For
example, Word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
•
AAC, WAV, PCM audio files
•
DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
•
WMA files in Lossless format
Maintenance
Clean the cabinet
•
Use a soft cloth slightly moistened with
a mild detergent solution. Do not use a
solution containing alcohol, spirits, ammonia
or abrasives.
Clean discs
•
When a disc becomes dirty, clean it with
a cleaning cloth. Wipe the disc from the
centre out.
•
Do not use solvents such as benzene,
thinner, commercially available cleaners,
or antistatic spray intended for analogue
records.
Clean the disc lens
•
After prolonged use, dirt or dust may
accumulate at the disc lens. To ensure good
play quality, clean the disc lens with Philips
CD lens cleaner or any commercially
available cleaner. Follow the instructions
supplied with cleaner.
13
EN
9 Troubleshooting
Warning
•
Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page
(www.philips.com/support). When you contact
Philips, make sure that the device is nearby
and the model number and serial number are
available.
No power
•
Ensure that the AC power plug of the unit
is connected properly.
•
Ensure that there is power at the AC
outlet.
•
Insert the batteries with their polarities
(+/– signs) aligned as indicated.
•
Replace the battery.
No sound or poor sound
•
Adjust the volume.
No response from the unit
•
Disconnect and reconnect the AC power
plug, then turn on the system again.
•
As a power-saving feature, the unit
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
Remote control does not work
•
Before you press any function button, first
select the correct source with the remote
control instead of the main unit.
•
Reduce the distance between the remote
control and the unit.
•
Insert the battery with its polarities (+/–
signs) aligned as indicated.
•
Replace the battery.