Toshiba SD-2705U Instrukcja obsługi - Strona 38

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz DVD Toshiba SD-2705U. Toshiba SD-2705U 46 stron. Sd-2705u user's guide

Drukuj stronę

PAGE 38

INITIAL SETTINGS

Selecting Digital Audio Output

Each DVD disc has a variety of audio output

options. Set the player's Digital Audio Output

according to the type of audio system you use.

Playback

Stream/PCM

Disc

96 kHz

PCM

Linear PCM

DVD

DTS DVD

DTS bit Stream

Dolby Digital

DVD

bit Stream

MPEG DVD

MPEG bit Stream

Audio CD/

PCM

Video CD

DTS Audio CD

DTS bit Stream

1, 2

OUTPUT

Dolby Digital/

PCM only

PCM

DTS bit Stream

Dolby Digital

PCM

bit Stream

PCM

DTS bit Stream

At the SETUP screen, press

Digital Audio Output and press

Disc Audio

Disc Subtitle

Disc Menu

Rating

Password

TV Aspect

Menu Language

Progressive

Digital Audio Output

5.1 Speaker Setup

Others

D D

E E

Press

to select the desired output and

press SELECT/ENTER.

You can select Digital Audio Output or Sampling

Frequency item by pressing SELECT/ENTER.

Digital Audio Output

DOLBY DIGITAL/PCM:

an active digital output is supplied to a Dolby Digital decoder,

(or an amplifier or other equipment with Dolby Digital

decoder).

Stream/PCM:

Select "Stream/PCM" if an active

digital output is supplied to an amplifier or other

equipment with DTS decoder, Dolby Digital decoder and

MPEG decoder.

PCM:

Select "PCM" if an active digital output is

supplied to an amplifier or other equipment with linear PCM

only (or MD recorder or DAT deck).

Sampling Frequency

To change the Sample Frequency setting, first select the

desired digital audio output type as indicated above.

If your A/V receiver or surround processor is NOT capable of

handling 96kHz signals, select the 48kHz option. When this

choice is made, this unit will automatically convert any 96kHz

signals to a 48kHz output so that your system is capable of

decoding them.

If your A/V receiver or surround processor is capable of

handling 96kHz signals, select the 96kHz option. When this

choice is made, this unit will pass each type of signal through

without any further processing.

Notes

❍

When you are not using the player's digital audio output, don't

select any of the options.

❍

If an active digital audio output signal is supplied to a receiver or

other equipment without a corresponding digital decoding capa-

bility, a very loud noise may be produced which could

permanently damage the speakers.

❍

The DTS DVD disc sound is played back only when the DVD

player is connected to a receiver with a DTS decoder.

D D

E E

to select

G G

DOLBY

/PCM

DIGITAL

Stream/PCM

PCM

Sample Freq.

48 KHz

96KHz

Select "DOLBY DIGITAL/PCM" if