Philips BTM177 Podręcznik użytkownika - Strona 14
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System stereo Philips BTM177. Philips BTM177 29 stron. Bluetooth wireless micro system
Również dla Philips BTM177: Specyfikacje (3 strony), Skrócona instrukcja obsługi (4 strony)
Drukuj stronę
Basic Functions
Switching the system on
●
Press STANDBY ON or SOURCE (or 2on
the remote control).
➜
The system will switch to the last selected
source.
●
Press CD, USB, FM, Bluetooth or AUX on
the remote control.
➜
The system will switch to the selected source.
To switch the system to standby mode
●
Press STANDBY ON on the system (or 2on
the remote control).
➜
The display displays clock time, or --: -- is
displayed if clock time is not set.
➜
The backlight for clock display is dim in
standby.
➜
The volume level (up to a maximum volume
level of 12), interactive sound settings, last
selected source and tuner presets will be
retained in the player's memory.
To switch the system to Eco-power
standby mode
●
Press and hold STANDBY ON (y on the
remote control) for more than 2 seconds.
➜
The display will go blank.
Power-saving automatic standby
The power-saving feature automatically switches
to standby 15 minutes after a CD/USB playback
has ended and no control is operated.
14
Adjusting volume and sound
1
Turn the VOLUME control anti-clockwise to
decrease or clockwise to increase volume on the
system (or press VOL -/+ on the remote
control).
➜
Display shows the volume level VOL and a
number from 1-31.
2
Press DSC repeatedly to select the desired
sound effect: POP / JAZZ / ROCK / CLASSIC .
3
Press DBB on the remote control to switch
bass enhancement on or off.
➜
Display shows
4
Press LOUD on the remote control to enable/
disable LOUDNESS feature.
●
LOUDNESS feature enables the system to
automatically increase the treble and bass sound
effect at low volume (the higher the volume, the
lower the treble and bass increase).
5
Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜
Playback will continue without sound.
●
To activate sound reproduction you can:
– press MUTE again;
– adjust the volume controls;
– change source.
Notes:
– The current DSC setting is shown when DSC
button is pressed once.
– When DBB is on, LOUDNESS feature will be
turned off automatically.
– When LOUDNESS feature is on, the DBB will be
turned off and the DSC setting will be changed to
CLASSIC automatically.
To listen through the headphone
●
Connect the headphone plug to the n socket
on the rear of the set.
➜
The speakers will be muted.
if the DBB is activated.