Philips BTM177 Podręcznik użytkownika - Strona 18

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla System stereo Philips BTM177. Philips BTM177 29 stron. Bluetooth wireless micro system
Również dla Philips BTM177: Specyfikacje (3 strony), Skrócona instrukcja obsługi (4 strony)

Drukuj stronę

USB Connection

Using USB connectivity

●

BTM177 is fitted with a USB port in the front

panel, offering a plug and play feature which

allows you to play, from your BTM177, digital

music and spoken contents stored on a USB

mass storage device.

●

Using a USB mass storage device, you can also

enjoy all the features offered by BTM177 which

are explained and instructed in the sections of

disc operation.

Compatible USB mass storage devices

With the BTM177, you can use

– USB flash memory (USB 2.0 or USB 1.1)

– USB flash player (USB 2.0 or USB 1.1)

• USB device which requires driver

installation under Windows XP is not

supported.

Note:

– In some USB flash players (or memory devices),

the stored contents are recorded using copyright

protection technology. Such protected contents will

be unplayable on any other devices (such as

MCM204 device).

Supported formats:

– USB or memory file format FAT12, FAT16,

FAT32 (sector size: 512 - 4096 bytes)

– MP3 bit rate (data rate): 32-320 kbps and

variable bit rate

– WMA v9 or earlier

– Directory nesting up to a maximum of 8

levels

– Number of albums: maximum 99

– Number of tracks: maximum 800

– ID3 tag v2.0 or later

– File name in Uicode UTF8 (maximum length:

128 bytes

The system will not play or support the

following:

• Empty albums: an empty album is an album

that does not contain MP3/WMA files, and

will not be shown in the display.

• Non-supported file formats are skipped. This

means that e.g.: Word documents .doc or

MP3 files with extension. dlf are ignored and

will not be played.

• AAC, WAV, PCM. NTFS audio files

• DRM protected WMA files

• WMA files in Lossless format

Playing a USB mass storage device

Make sure that your BTM177 is being powered

on.

Plug a compatible USB mass storage device to

BTM177's USB port marked

a suitable USB cable to connect between the

device and BTM177's USB port.

➜

The device will automatically power on.

●

If the device is not powered on, turn on the

power manually, then re-connnect it.

Press SOURCE repeatedly (or USB on the

remote) to enter USB mode.

➜

PLEASE INSERT USB appears if no audio

file is found in the USB device.

Press 2; on your BTM177 to start play.

●

To use other playback features, see the section of

CD/MP3 Operation.

Helpful hints:

– Make sure that file names of MP3 files end

with .mp3. and the file names of WMA files end

with .wma.

– For DRM protected WMA files, use Windows

Media Player 10 (or later) for conversion. Visit

www.microsoft.com for details about Windows

Media Player and WM DRM (Windows Media

Digital Rights Management).

– For USB device playing, if the display shows "OL",

it means that the USB device is electrically

overloading BTM177. You need to change a USB

device.

INFORMATION REGARDING USB DIRECT:

1. Compatibility of the USB connection on this

micro system:

a) This micro system supports most USB Mass

storage devices (MSD) that these devices are

compliant to the USB MSD standards.

i) Most common Mass storage class

devices are flash drives, memory sticks, jump

drives and etc.

ii) If you see a "Disc Drive" showing up on

your computer after you have plugged the mass

storage device into your computer, most likely it

is MSD compliant and it will work with this

micro system.

b) If your Mass storage device requires a

battery/power source, please make sure you

have a fresh battery in it or charge the USB

device first and then plug it into the micro

system again.

. If needed, use