Toshiba SD-370EKE Instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz DVD Toshiba SD-370EKE. Toshiba SD-370EKE 38 stron. Dvd video player

Drukuj stronę

Introduction

Identification of Controls (continued)

The instructions in this manual describe the functions on the remote control. Please see below:

OPEN/CLOSE button

Press to OPEN/CLOSE the disc tray.

Number buttons

Press number buttons to play relevant chapter/track.

E.P.M. button

Use to select the picture enhancement.

Brightness

Sharpness

Select the picture enhancement by pressing

then press

to make your selections.

To exit the picture enhancement selection, press

E.P.M. again.

E.A.M. button

Use to toggle the sound enhancement on or off

when DVD discs is Dolby Digital 5.1Ch and "Digital

Output" is PCM or Off.

ANGLE button

While playing a scene recorded with multiple angles,

press the ANGLE button.

e.g.

Number changes to show the number of the

current angle. (The maximum number of

possible angles is 9.)

ANGLE button is also use to change the picture

transition mode of JPEG playback.

Press ANGLE button during JPEG playback will

change the picture transition mode as follows:

Wipe Down

Wipe Up

Center In

Center Out

Blind Down

Blind Up

Random

None

During slide show playback and when loading is in

progress, ANGLE button is not allowed to operate.

The prohibited sign "

will be displayed on the TV screen.

SUBTITLE button

For DVD discs, press this button to change the

language of the subtitle.

To turn off the subtitle, press SUBTITLE several

times until " .... Off " appears on the screen.

Notes

The numbers of languages vary with the DVD discs.

When you select a subtitle language which is not

included on the disc, the DVD video player plays a

prior language programmed on the disc.

During some scenes, the subtiltes may not appear

immediately after you change the subtitle language.

Not allowed at the moment "

PAUSE/STEP button

Press PAUSE/STEP to freeze playback.

During still playbacks, each time you press the

PAUSE/STEP button, the picture advances one

frame.

Pause

SKIP

button

Press SKIP

once within 5 seconds of playback

to skip to the previous chapter/track. If you press the

button after 5 seconds, it will start playback from the

beginning of the current chapter/track.

REV

button

Press to change the fast reverse playback speed.

X30

Direction buttons

Use UP/DOWN/RIGHT/LEFT to select a function

in the setup menu.

During JPEG playback, press the

rotate the image clockwise by 90,180 or 270 degree.

Press the

repeatedly to rotate the image counter

clockwise by 270, 180 or 90 degree. When in Zoom

mode, this function does not work.

TOP MENU button

Display the title menu on DVD Disc.

If you display the top menu during playback and

press the TOP MENU button again without selecting

any title, the DVD video player may resume playback

from the point where you first pressed the TOP

MENU button(depending on the actual DVD video

disc.).

When playing JPEG, if you press TOP MENU in

full-screen review, the DVD video player will display

a menu of 9 thumbnail images.

CLEAR button

Use CLEAR to delete the scheduled program or to

cancel input data in the setting mode.

DISPLAY button

Bring up the on-screen display showing the

information of the current playing status.

MEMORY button

Press this button, the OSD will show as below:

Memory Input

Title/Chapter

Play Memory

Clear All

You can use the cursor button(

number buttons to input your desired title/chapter

/track. You can program up to 12 selections into the

memory (Memory playback). When you have finished

programming, you can move the cursor to the Play

Memory, then press the ENTER button to start the

playback. The programmed selections will be cleared

when you open the disc tray or turn the power off.

Step

X100

repeatedly to

Memory Input

Track

Play Memory

Clear All

) and