Toshiba XDE600KE Instrukcja obsługi - Strona 14

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Odtwarzacz DVD Toshiba XDE600KE. Toshiba XDE600KE 40 stron. 1080p up-scaling dvd player
Również dla Toshiba XDE600KE: Instrukcja obsługi (40 strony)

Drukuj stronę

Downloaded From Disc-Player.com Toshiba Manuals

Connections

Content of the output for each output jack is shown in the following table and differ depending on the On-Screen Display

Setting:

On-Screen Display Setting

"Video out"

HDMI Output

Setting

Component

Invalid

(Interlaced)

RGB

Invalid

P-Scan

Invalid

(Progressive)

480p/576p

720p

1080i

HDMI

1080p

1080p/24F

Note

• If Auto is selected, it follows preference HDMI aspect ratio of TV.

Connecting to Optional Equipment

You can enjoy high quality dynamic sounds by connecting the DVD player to optional audio equipment.

• For connection to your TV, see "Connecting to a TV" .

• This section uses the following reference marks.

: Front speaker

: Rear speaker

: Sub woofer

: Center speaker

: Signal ﬂ ow

Notes

• Do NOT connect the OPTICAL OUT or COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the AC-3 RF input of a Dolby

Digital Receiver. This input on your A/V Receiver is reserved for Laser disc use only and is incompatible with the OPTICAL

OUT /COAXIAL DIGITAL AUDIO OUT jack of the DVD player.

• Connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the "DIGITAL (COAXIAL)" input of a Receiver or

Processor.

• Connect the OPTICAL OUT jack of the DVD player to the "DIGITAL (OPTICAL)" input of a Receiver or Processor.

• Refer to the owner's manual of the connected equipment as well.

• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the

wall outlet before making any connections.

• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver's volume to a moderate listening

level. Otherwise, the speakers may be damaged by a sudden high volume sound.

• Turn off the ampliﬁ er before you connect or disconnect the DVD player's power cord. If you leave the ampliﬁ er power on, the

speakers may be damaged.

Content of output for each output jack

HDMI

Video

Component

Output

Composite

480i/576i

Composite

480p/576p

Composite

480i/576i

720p

Composite

480i/576i

1080i

Composite

480i/576i

1080p

Composite

480i/576i

Composite

480i/576i

Warnings

• When you are connecting (via the OPTICAL OUT or

COAXIAL DIGITAL AUDIO OUT jack) an AV decoder that

does not have Dolby Digital, DTS or MPEG2 decoding

function, be sure to set "Digital Output" to "PCM" from the

on-screen displays. Otherwise, high volume sound may

damage your hearing as well as the speakers.

• When playing DTS-encoded discs (DVDs and audio

CDs), excessive noise may be output from the analog

audio output jacks. To avoid possible damage to the

audio system, you should take proper precautions when

the analog audio output jacks of the DVD player are

connected to an ampliﬁ cation system. To enjoy DTS Digital

Surround™ playback, an external 5.1 channel DTS Digital

Surround™ decoder system must be connected to the

OPTICAL OUT or COAXIAL DIGITAL AUDIO OUT jack

of the DVD player.

Output

RGB