Toshiba T520 Instrukcja obsługi - Strona 12

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Toshiba T520. Toshiba T520 37 stron. 3lcd data projector

Drukuj stronę

Connection

Before connection

• Read the owner's manual of the device to be connected to the projector.

• Some types of computer cannot be used connected to this projector.

Check for an RGB output terminal, supported signal

• Turn off the power of both devices before connection.

• The figure below is a sample connection. This does not mean that all of these devices

can or must be connected simultaneously. (Dotted lines mean items can be exchanged.)

Computer

To audio output

To USB terminal

To RGB

p.52

output

USB cable

Audio cable

(for computer)

(supplied)

USB

MONITOR

CONTROL

AUDIO

R - AUDIO - L

Control cable

Yellow

p.71

(to video output)

To audio

output

To RS-232C terminal

White (L)

Red (R)

Computer (for control)

Notes

• COMPUTER terminals 1 and 2 function identically.

• The AUDIO terminal doubles for devices connected to COMPUTER terminals 1 and 2.

p.69

, etc.

Desktop computer

To audio

To RGB

RGB cable

output

(supplied)

Monitor cable

Mini D-sub 15P-BNC

(not supplied)

Audio cable

(not supplied)

COMPUTER

( Y/P

)

VIDEO

S-VIDEO

S-Video cable

(not supplied)

AV cable

(supplied)

To audio

output

To S-Video

White (L)

output

Red (R)

VCR

DVD player

How to use the PC card slot

Please read this chapter if the model you purchased includes a PC card slot.

The wireless LAN PC card enables you to connect the projector wirelessly with a

personal computer that supports IEEE802.11b based wireless LAN.

that communication between all the computers based on IEEE802.11b and this projector

is not guaranteed.) You can also use a commercially available memory card to project

JPEG image files using this projector.

or mounting a PC card.

I Mounting a PC card

q Remove the PC card slot cover.

Press lightly on the circle ("O") while

sliding the cover in the direction of the

arrow.

Card slot cover

w Insert the PC card.

After making sure of the card

orientation, press it in firmly until it

stops.

To Y/C

output

PC Card

Green (Y)

e Replace the PC card slot cover.

Blue (C

Red (C

)

Replace the PC card slot cover to keep

Conversion

dust from entering.

adapter

BNC-pin

(not supplied)

I If CARD indicator turns red

Press the RESET switch with a thin pin or

similar implement (it is at the bottom of a

recess).

p.33

(Please note

p.41

Please follow the steps below when removing

I Removing a PC card

q Look at CARD indicator.

If it is off, proceed to step r.

UNMOUNT button

CARD indicator

w Press the UNMOUNT button.

Begins processing for PC card removal

e Wait until CARD indicator goes

out.

Never remove the PC card while lit.

Doing so could damage the PC card or

corrupt your data.

r Press the Eject button.

Eject button

The Eject button is a bit stiff, so press

firmly while supporting the projector.

Be careful to avoid injury when doing

so.

CARD indicator

RESET switch