Toshiba TDP-D2-US Instrukcja obsługi - Strona 18

Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Toshiba TDP-D2-US. Toshiba TDP-D2-US 20 stron. Toshiba tdp-d2-us: specifications
Również dla Toshiba TDP-D2-US: Specyfikacje (2 strony), Specyfikacje (1 strony)

Drukuj stronę

1. Connection

Before calling service personnel

If you think something is wrong, check the following before contacting customer service.

p.33

Please see "Trouble indications"

as well.

If This Happens

• Is the power cord plugged in? Is it connected to the projector?

No power

• Is the lamp cover loose?

• Is the ambient temperature high?

Power goes out

during use

• Is the air intake or air exhaust blocked?

No picture

• Is the input source selecting properly?

• Is the mute function on?

• Is the brightness setting minimized?

• Are the connections set up correctly?

• Are all the connected devices functioning properly?

• Is a plug inserted to AUDIO OUT terminal?

No audio

• Is the mute function on?

• Is the volume setting minimized?

• Are the connections set up correctly?

• Are all the connected devices functioning properly?

• Is the input signal supported by the projector?

Picture not

• Is the correct video mode selected?

displayed

correctly

• Is the correct signal format selected?

• Is the selecting of computer or Y/P

• Is there something generating an abnormal video signal, for

instance the video tape?

• Is the lens dirty?

Picture blurred

• Is the lens focus adjusted optimally?

Part of picture

out of focus

• Is the projection distance within the projector's supported range?

p.17

• Is the projector's screen placement angle tilted too far?

• Are the sharpness or sampling phase adjustments off?

• Are the brightness or contrast adjustments off?

Image is dark

• Is the lamp nearing the end of its service life?

• Are the color, tint, R-level, G-level, or B-level adjustments off?

Colors too light

Bad shading

• Is the screen dirty?

• Is the lamp nearing the end of its service life?

• Are the remote control's batteries drained?

Remote control

• Are the batteries inserted into the remote control correctly?

doesn't work

• Is the remote control being used within the effective range?

• Are there any obstructions between the remote control and

projector?

• Are there any fluorescent or other bright lights shining at the

projector's infrared remote sensor?

Check

p.33

p.21

p.24

p.28

p.18

p.24

p.22

p.18

p.36

p.37

p.23

input correct?

p.21

p.31

p.22

p.17

p.28 p.23

p.28

p.26

Specifications

I List of general specifications

Item

Consumption Power

Weight

External Dimensions

(including protruding parts)

Cabinet material

Conditions for usage environment Temp: 0°C to 35°C; relative humidity: 30% to 70%

Display system

Native resolution

Lens

Lamp

Projection screen size

Projection distance

Speaker

COMPUTER IN terminals

MONITOR OUT terminal Mini D sub 15 pin RGB / Y/P

S-VIDEO terminal

VIDEO terminal

AUDIO IN terminal

AUDIO OUT terminal

CONTROL terminal

USB terminal

p.28

p.16

Specification

340 W

2.4 kg

248 × 90 × 201 mm (W × H × D)

Magnesium alloy, Aluminum alloy

DLP

(1-tip DMD

)

1,024H × 768V XGA

Zoom lens F=2.4-2.6 f=24.19-30.65 mm

High-pressure mercury lamp

37 - 180 inches

1.5 - 6 m

1 W (Monaural)

Mini D sub 15 pin RGB / Y/P

(dual use)

Mini DIN 4 pin

RCA Pin Jack, 1 V (p-p), 75 Ω

3.5 mm dia. stereo mini-jack, 1.5 V (rms); 22 kΩ or more

3.5 mm dia. stereo mini-jack, 1.5 V (rms); 8 Ω or more

Mini DIN 8 pin (RS-232C)

Type B (USB 1.1)