Toshiba TDP-EX20U - Short Throw DLP Projector Instrukcja obsługi - Strona 34
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Toshiba TDP-EX20U - Short Throw DLP Projector. Toshiba TDP-EX20U - Short Throw DLP Projector 50 stron. Toshiba tdp-ex20u: specifications
Również dla Toshiba TDP-EX20U - Short Throw DLP Projector: Specyfikacje (2 strony)
Drukuj stronę
Using the Network Utility (Continued)
•
To transmit sound, press the
button then launch the application that plays the
contents including the sound. When you operate the projector using Windows Vista™,
"Switching audio play device" window will be displayed after pressing the start button
of Network Utility. Follow the instruction to switch the audio play device, and then launch
the application that plays the contents including sounds.
•
If no sound can be heard from the computer though the connection is stopped, re-
launch the application that plays the contents including the sound.
•
Transmission may not be available depending on the sound type.
•
Sound cannot be transmitted if multiple projectors are selected.
•
The audio signals transmitted by a computer become mono.
Displaying a JPEG image saved on a computer via the
projector
Launch the Network Utility software
1
application.
The Screen Image transmission mode window
appears on the computer's screen.
2
Click on the JPEG File icon
The Network Utility window changes to JPEG File
transmission mode.
3
Click on the Browse button, and
select the file to send.
Clicking on the Browse button displays the Open
dialog box. Select the file to send, then click on the
Open button.
The selected file is added to the pull-down list in
the Network Utility's Transmission File field.
Select the file to be sent from the
4
pull-down list of the Transmission
File field.
Click on the Transmission File field's
to display the pull-down list. Select the file to be
sent from this list.
A thumbnail of the selected file appears in the
Preview box. The file displayed here will be
transmitted.
3
Step
can be skipped.
The way that drag and drop the file to be sent from the desktop or Windows Explorer
into the Preview box is also available. In this case as well, the selected file is added to
the file pull-down list Transmission File field's.
.
button
66
Select the projector to be
5
transmitted.
The IDs of projectors accessible for transmission
will be listed. (If projector name has been set
up already, it is shown instead of the MAC
address.) Select the checkbox of the projector
to be transmitted to from this list. Then icon
is displayed on the projector's screen for few
seconds.
It is possible to select up-to four projectors.
6
Click on the
button.
The selected file's image is displayed by the projector.
Notes
•
Only one file can be sent at a time. To send another file, repeat steps
•
Selecting a file by drag and drop may not be available with Windows Vista™.
Displaying a video file saved on a computer via the projector
Launch the Network Utility software application.
1
The Screen Image transmission mode window
appears on the computer's screen.
Click on the
icon.
2
The Network Utility window changes to Movie
File transmission mode.
Click on the Advanced button.
3
The Movie file: Advanced Settings dialog
appears. Set the dialog as shown below, as
necessary.
•
Interruption
Check the No Interruptions checkbox to
prevent other computers from interrupting the
projector, for example, during presentation.
•
Transmission Mode (Sound)
Check the Transmit sound to a projector
(Only when connected with one projector)
checkbox to transmit the sound being played on
a computer to the projector.
4
6
and
.
67