Toshiba TDP-MT200 Instrukcja obsługi - Strona 31
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Toshiba TDP-MT200. Toshiba TDP-MT200 44 stron. Dlp projector
Również dla Toshiba TDP-MT200: Instrukcja obsługi (46 strony)
Drukuj stronę
English
Français
The default setting menu
This menu shows placement status and other settings.
Item
Projection
Sets projection mode in accordance with Placement Style.
mode
No signal
Set the timer to wait for the power to be turned off after signal input stops.
power off
Press
Off (not turned off)/1 min./5 min./10 min./30 min./60 min.
Auto input
Set whether the input with signals is only selected or not.
search
Power on
Sets whether to turn on the power when the ON/STANDBY button is pressed
(Manual), or when the power cord is plugged in (Auto). Manual
Lamp power
[Note 1]
Sets the lamp power.
Fan mode
[Note 2]
Sets the cooling fan speed.
Reset all
Press
Resets all adjustments and settings to their factory settings.
Notes
1: When Lamp power is set to Low, the screen becomes a little darker, but the cooling fan noise gets
quieter. This setting will be cleared when you turn the power off.
2: Setting [Fan mode] to [High] increases the cooling fan speed. Set this option to use the projector,
for example, at high altitude (over 1,500 meters above sea level).
Notes
• Note that in the event of a power outage but the power is restored afterwards, the projector
power will come on if Power on is set to Auto, and the power cord is plugged in.
• When you turn off the projector even if Power on is set to Auto, you must press the ON/
STANDBY button to turn the power off.
Español
Deutsch
Description
(Standard)
(Rear)
. Switch with
and
.
31
Italiano
Português Svenska
(Mounted
from ceiling)
.
Low
Standard
p.19
(Rear mounted
from ceiling)
On
Off
Auto
Standard
High
Yes
No