Toshiba TDP-MT500 Instrukcja obsługi - Strona 13
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Toshiba TDP-MT500. Toshiba TDP-MT500 42 stron. Home projector
Również dla Toshiba TDP-MT500: Instrukcja obsługi (40 strony)
Drukuj stronę
How to use remote controller
Name and function of operational parts of remote controller
POWER button:
MEMORY (1, 2, 3) buttons:
Set the pre-stored values in the
picture adjustment menu when
pressed.
MENU button:
Displays menu.
Erases the menu when pressed again.
On the picture quality adjusting buttons
When any of the picture quality adjusting button is pressed, its corresponding screen for adjusting the
picture quality appears. Then, adjust the picture quality by pressing % and $ button. The picture quality
adjustment can also be made in the picture quality menu. (See Page 26.)
The following picture quality adjusting buttons are displayed on the menu screen:
CONTRAST ......... Adjusts the contrast of projected picture images. Every time the % button is pressed, the pro-
jected image becomes brighter and more vivid. Every time the $ button is pressed, the pro-
jected image becomes darker and less vivid.
BRIGHT ................ Adjusts the brightness of projected picture images. Every time the % button is pressed, the
projected image becomes brighter. Every time the $ button is pressed, the projected image
becomes darker.
COLOR ................ Adjust the color thickness of projected picture image. Every time the % button is pressed, the
projected image color becomes thicker. Every time the $ button is pressed, the projected
image color becomes thinner.
TINT ..................... Adjusts the tint of projected picture images. Every time the % button is pressed, the skin color
of projected image becomes more reddish. Every time the $ button is pressed, the skin color
of projected image becomes greenish.
COLOR TEMP ..... Selects one of the preset color temperatures.
GAMMA ................ Selects one of the preset gamma corrections.
SHARPNESS ....... Adjusts the sharpness of projected picture images. Every time the % button is pressed, the
projected picture image becomes sharper. Every time the $ button is pressed, the projected
picture image becomes softer.
POWER ON/OFF
22
18
SOURCE
C1
C2
COMP1
COMP2
S
V
S-VIDEO
VIDEO
16:9
4:3
4:3
16:9
REAL
REAL
ASPECT
27
2
3
1
ENTER
25
MENU
CNT
BRI
COL
CONTRAST BRIGHT
COLOR
TEM
GAM
SH
COLOR
GAMMA SHARPNESS
TEMP
DVI
SOURCE button:
D
DVI-D
Selects an input video signal to be
DVI
projected.
A
DVI-A
ASPECT button:
ZM
Selects size of the video image according to
ZOOM
the video signal to be projected.
DYN
DYNAMIC
ENTER button:
25
Used to determine menu item.
Directional button:
Used to shift menu item and adjust values.
EXIT button:
25
EXIT
Displays the menu in one-level higher
hierarchy when pressed.
TIN
TINT
Picture quality adjusting button:
(See below)
LIGH button:
LIGHT
LIGHT
Switches between LIGHT modes of remote controller every time
it is pressed.
If the remote controller button lights up when the LIGHT button
is pressed, the dark-room mode is brought into ON. If it does not
light up, the normal mode is ON.
Dark room mode : All the buttons on the remote controller light
up if any of the buttons is pressed.
Normal mode
: Any of the buttons on the remote controller
does not light up if any of the button is
pressed (Except for LIGHT button).
• The light automatically comes off a while after the remote
controller button is released.
PREPARATION
18
22
20
25
13