Toshiba TDP-T350 - XGA DLP Projector Instrukcja obsługi - Strona 27
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Toshiba TDP-T350 - XGA DLP Projector. Toshiba TDP-T350 - XGA DLP Projector 31 stron. Tdp-t250u user's guide
Drukuj stronę
Lens and main unit cleaning
WARNING
• Request cleaning and maintenance of a ceiling-mounted unit from your projector dealership.
Attempting to clean/replace the lamp at a high site by yourself may cause you to drop
down, thus resulting in injury.
■ Lens cleaning
• Clean the lens with a commercially available blower and/or
lens cleaner.
• The lens is easily scratched, so do not rub it with hard objects,
or strike it.
■ Main unit cleaning
• Clean the main unit after unplugging the power cord.
• Wipe dirt off the main unit gently with a soft cloth.
• If the soiling is severe, dip the cloth in a neutral
detergent diluted in water, wring well, and gently wipe
off the dirt, then finish up by wiping with a dry cloth.
52
Trouble indications
The indicator lights and a beep sound inform you of internal abnormalities.
No power
⇒ Problem with projector
• Unplug the power cord, and contact your dealer.
(Off)
Lamp went out during use, or won't come on
⇒ Lamp temperature is high so that it is difficult to turn on, the
lifetime of
(Red lit)
the lamp has ended or the projector is malfunctioning. In this
case, a beep sound is made.
(Red lit)
• Unplug the power cord and wait for a short while, then turn the power
back on.
• If a lamp burns out, replace it with a new one.
❈ After approx. one minute of abnormal display, the projector
returns to the standby state waiting for internal cool down.
Power went out during use
⇒ Internal overheating, or the outside temperature is too high. In
(Red lit or flashing)
this case, a beep sound is made.
(Green lit)
Or (Orange lit)
• Place the projector so that the air intake and exhaust are not
blocked.
(Red lit)
• Unplug the power cord and wait for a short while, then turn the power
back on.
❈ The
icon will appear before the power goes out.
❈ After approx. one minute of abnormal display, the projector
returns to the standby state waiting for internal cool down.
Power went out during use
⇒ Problem with internal cooling fan. In this case, a beep sound is
(Red lit or
made.
flashing)
• Unplug the power cord, and contact your dealer.
Or (Orange lit)
❈ The
icon will appear before the power goes out.
(Red lit)
❈ After approx. one minute of abnormal display, the projector
returns to the standby state waiting for internal cool down.
Power went out during use
⇒ Problem inside the projector. In this case, a beep sound is made.
(Green lit
• Unplug the power cord and wait for a short while, then turn the power
or Off)
(Green
(Green
lit or Off)
flashing)
back on.
• If the above action will not clear the problem, unplug the power
cord, and contact your dealer.
(Red lit)
❈ The
icon will appear before the power goes out.
❈ After approx. one minute of abnormal display, the projector
returns to the standby state waiting for internal cool down.
53