CROWNARCH VD51C Instrukcja obsługi i gwarancja - Strona 7

Przeglądaj online lub pobierz pdf Instrukcja obsługi i gwarancja dla Oglądaj CROWNARCH VD51C. CROWNARCH VD51C 8 stron.

HOW TO ADJUST THE SIZE OF THE MESH BAND

To Adjust the Length of the strap to a suitable size

1) Carefully place small tool or

your finger in the slot on the

small clasp. Lift the bar in the

direction facing away from the

straight pin.

4) To secure strap on your wrist, place the hook that is

located under the bigger security clasp onto the bar that is

located on the slider mechanism. Then flip the security

clasp over the slider mechanism firmly until you hear a

click. Your strap is now secured.

MESH STRAP ADJUSTMENTS

2) Shift the adjustment

mechanism to the desired

position (make sure the clasp

is set in one of the indentations

on the back of the band).

3) Press the slotted clasp and

make sure it is in a closed

position and doesn't come

undone. Your strap has now

been adjusted and you will no

longer need to adjust the strap.

5) To Take off the Watch unhinge the bigger clasp

from the small one, then gently lift off the hook off

the bar.

Note: You do not need to readjust the position of

the slider mechanism everytime you take off the

watch. If you do decide to adjust the watch please

make sure you do so on a flat surface instead of on

your wrist, as doing so, may cause the watch or the

slider mechanism to fall off the strap.

If the slider mechanism falls off the watch, place

the watch on a flat surface and place the

mechanism on the end off the strap, making sure

the part that says "stainless steel is on the bottom.

The Slider mechanism should enter the strap on

the side with the flaps not the side with the bar. To

put mechanism back on the strap make sure the

flaps are open on the slider mechanism.

Version-01

Cal.VD51C