Toshiba TLP-S201 Instrukcja obsługi - Strona 36
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Projektor Toshiba TLP-S201. Toshiba TLP-S201 36 stron. 3lcd data projector (xga / svga / high brightness / with pc card slot & document camera)
Drukuj stronę
Specifications (Continued)
I CONTROL terminal
G Pin assignment
Pin No.
1
1
2
2
4
3
3
5
4
5
6
6
8
7
7
8
Mini DIN 8 pin connector
G Interface format
1 Communication method
RS-232C, 9600bps, No Parity, Data Length: 8 bits;
Stop Bit Length:
2 Communication format
STX (02h) Command (3Byte) ETX (03h)
Only 1 command valid per communication.
3 Data format
For input commands, only ASCII-compliant all-uppercase
alphanumeric characters supported.
4 Replies
Acknowledge ACK (06h) No acknowledge NAK (15h)
If commands are to be sent consecutively, wait for the response from the projector
(ACK or NAK) before sending the next command.
G Main Commands
Item
Command
Power on
PON
Power off
POF
OSD display on
MO0
OSD display off
MO1
Auto setting (RGB input)
PAT
Status display on
DON
Status display off
DOF
Note
• Contact your dealer for control cable and other commands.
I Separately Sold Product
Replacement Lamp
Model TLPLW1
Note
• Design, specifications, etc. subject to change without notice for improvements, etc.
Signal Name
Description
RXD
Receiving data
CTS
Consent to send
DSR
Data set ready
GND
Signal ground
RTS
Request to send
N.C
No connection
TXD
Sending data
N.C
No connection
1 bit
Item
Command
Computer (1) input select
IN1
Y/P
/P
(1) input select
IN2
B
R
Computer (2) input select
IN3
Y/P
/P
(2) input select
IN4
B
R
Video input select
IN5
S-video input select
IN6
PC card input select
IN7
Camera input select
IN8
70
71