MSI RX800GTO-TD256E Instrukcja szybkiej instalacji
Przeglądaj online lub pobierz pdf Instrukcja szybkiej instalacji dla Karta graficzna MSI RX800GTO-TD256E. MSI RX800GTO-TD256E 2 stron. Pci express interface
Drukuj stronę
TM
*
VIDEOSOAP
noise removal filtering for captured video
*
MPEG1/2/4 decode and encode acceleration
*
DXVA Support
*
Hardware Motion Compensation, iDCT, DCT and color space conversion
*
All-format DTV/HDTV decoding
*
YPrPb component output for direct drive of HDTV displays
*
Adaptive Per-Pixel De-Interlacing and Frame Rate Conversion (temporal filtering)
*
Dual integrated display controllers
*
Dual integrated 10 bit per channel 400 MHz DACs Integrated 165 Mhz TMDS transmitter
(DVI 1.0 compliant / HDMI interoperable and HDCP ready)
*
Integrated TV Output support up to 1024x768 resolution
*
Windows Logo Program compliant
R
*
160 million transistors on 0.13 micron low-k fabrication process
*
Up to sixteen extreme parallel pixel pipelines
*
Six programmable vertex shader pipelines
*
256-bit quad-channel GDDR1 memory interface
*
AGP 8X support or PCI Express support
*
Adaptive Per-Pixel De-Interlacing and Frame Rate Conversion (temporal filtering)
* Innovative 0.11 micron process technology
2D Display Modes: Resolutions, colors and masimum refresh rates(Hz) in 256, 65K Or 16.7M
colors
640x480
200Hz
1600x1200
800x600
200Hz
1920x1080
1024x768
200Hz
1920x1200
1152x864
200Hz
1920x1440
1280x1024
160Hz
2048x1536
H
ardware Installation
Follow the steps
below
to install the VGA card :
1. Remove the computer case.
2. Locate the PCI Express slot on your mainboard.
Warning: Inserting the VGA card into a wrong
slot (e.g. AGP slot) may damage your card (refer
to your mainboard manual for more Information).
3. Put the card directly over the
PCI Express
slot
and press one end of the card into the slot first.
Gently but firmly press the other end until it is
fully seated in the slot.
4. Secure the card with a bracket screw.
5. Install all other cards and devices and connect
all the cables, and then install the case.
6. Connect the monitor. Now, you are ready to
install the software on your computer.
S
oftware Installation
R
(for
Windows XP/ 2000
)
To install the driver of the VGA card to your computer running
please follow the steps below:
1. Turn on the computer.
2. Insert the
CD
into the CD-ROM drive. The Autorun program will start the Setup
program, and show the setup screen as follows:
120Hz
120Hz
100Hz
3. Click ATi VGA Drivers. Follow the on-screen instructions to complete the
installation.
90Hz
4. After finishing the installation, restart the computer as instructed.
85Hz
I
TM
nstalling MSI Live Update 3
MSI
TM
Live Update 3
TM
is a useful utility for you to upgrade your MSI
VGA card. Thanks to the powerful capacity of this utility, you can conveniently
download and automatically update the BIOS and the drivers on-line, without spending
much time in searching many Web sites to find the BIOS or drivers you want.
Installing from the CD-Title
1. Insert the CD into the CD-ROM drive, and start the Setup program.
2. Click the Utility tab on the setup screen.
TM
TM
3. Click the MSI
Live Update 3 . Follow the on-screen instructions to complete the
installation.
TM
Installing from the MSI
Web Site
1. Link to MSI's website at http://www.msi.com.tw
2. Select /Download/ VGA on the upper part of the MSI's homepage to enter
the Download page.
3. Select Utility under the selections of VGA on the left side of the web page.
4. Find and click MSI Live Update to download the utility.
5. Unzip the downloaded utility first and then install this utility by clicking on LiveUpdate.exe.
6. Follow the on-screen instructions to complete the installation.
Windows XP or 2000,
R
7. Launch MSI Live Update and to enter the main page of this utility as shown below.
Tip : If, on your computer, the
Autorun program does not execute
automatically, please 1) enable the
CD-ROM drive Auto-detect function
from Control Panel; or 2) find and
run the setup.exe file manually from
the CD.
U
sing MSI Live VGA Driver Update
TM
TM
MSI
Live VGA Driver
This service enables you to update the latest VGA driver for your VGA card.
TM
mainboard and
1. To update the MSI
column of the main page.
2. This utility will start checking your platform and the information on the VGA card, and
display the information in a list.
3. Click the graph button on the bottom to connect MSI Live Update Series Server.
Then, it will automatically connect the Internet and compare the version of the driver
in the database.
4. It may take several minutes to detect the required drivers. Please wait while
proceeding detection.
5. Click the InstallShield Wizard button on the right side of the table to download and
update the driver. All actions will proceed automatically.
6. Follow the on-screen instructions to complete the updating procedure.
TM
TM
The page of the MSI
Live Update 3
TM
TM
TM
Update
TM
Live VGA Driver , click Live VGA Driver
TM
TM
item on the left