Croydex AP400422 Instrukcje montażu - Strona 2
Przeglądaj online lub pobierz pdf Instrukcje montażu dla Produkt hydrauliczny Croydex AP400422. Croydex AP400422 2 stron. 13"/16"/33cm/40cm angled grab 'n' grip bar
Drukuj stronęFitting Instructions
1. Slide each of the wall bracket covers off the grab rail ends and discard plastic
transit clip. (See Fig.1)
Fig.
2. Place the grab bar in position on the wall and using the hole centres of each wall
bracket as a template, mark the screw fixing positions on the wall surface. Fitted
correctly, angled rails should be installed with one section horizontal so that the
forearm can be used for extra leverage. The other section is angled upwards and
away from the user. (See Fig.2)
3. Drill the holes to a depth suitable for your fixings in the marked positions using a
masonry drill. If the product is to be fitted onto a ceramic tiled wall, a ceramic drill
bit should be used.
4. Insert the wall plugs flush to the surface of the wall. If fitting to a tiled surface, the
wall plugs should be inserted below the surface of the tile to avoid cracking.
5. Insert wall screws through the holes of the wall brackets and screw securely to
the wall.
6. Locate the hollow boss of the wall bracket cover onto the corresponding boss on
the grab rail and firmly press down until clipped in position to hide the screw
fixings. (See Fig.3)
7. Before first use check the rail is securely fitted to the wall.
Additional Information
•
This product must only be fitted to solid brick, concrete block walls or
similarly strong materials offering appropriate support for the maximum safe
working load.
•
Maximum safe working load for the Grab Bar is 160kg.
Product Care Advice
•
To retain the best quality finish, clean product regularly with a soft damp cloth.
•
Do not use abrasive or chemical cleaners, as these will damage the product.
Markings
BS EN 12182:1999 Technical Aids for Disabled Persons - General Requirements and Test
Methods.
Please retain this leaflet for future reference.
For details of the other items in the Croydex range please visit our website:
www.croydex.co.uk
Croydex Limited, Central Way, Andover, Hants, SP10 5AW, UK
Tel: +44 (0) 1264 365881. Fax: +44 (0) 1264 356437
Website: www.croydex.co.uk. E-mail: [email protected].
Fig.
Fig.3
S&H 013 R02