Dimplex Coldwatcher MPH 1000 Instrukcja obsługi - Strona 4
Przeglądaj online lub pobierz pdf Instrukcja obsługi dla Grzałka Dimplex Coldwatcher MPH 1000. Dimplex Coldwatcher MPH 1000 8 stron. Convector heater
Również dla Dimplex Coldwatcher MPH 1000: Instrukcja instalacji i obsługi (4 strony)
Drukuj stronę
Suitable for fixed mounting on the wall or floor, they can also be used free-standing in
a vertical or horizontal position. For maximum heating effectiveness the heater should
be positioned as low as possible within the area to be heated. Note: If the heater is to
be used unattended for long periods (e.g. in lofts) it should be permanently mounted in
accordance with the fixing instructions given below.
Installation
A
C
W
H
FIXING THE HEATER
The heater may be fixed to the wall or floor using the fixing holes provided in the mounting
frame. Please refer to the Section "Heater Dimensions and Minimum Operating Distances"
before fixing the heater in position.
FIXING TO THE WALL
The heater must be fixed only in the upright position with the control panel at the bottom.
The position of the two upper fixing points should first be marked on the wall, at a
horizontal distance of 100mm apart, Step 1. Place the heater in position with the upper
4
B
D
W
H
A. Horizontal mounting, fixed or portable:
Minimum horizontal distances from sides
and end of heater to obstruction. Minimum
distances from top of heater to shelf or
overhanging obstructions.
B. Wall mounting: Minimum vertical distance
from top of heater to shelf or overhanging
obstruction. Minimum horizontal distance
from front of heater to obstruction.
C. Upright portable operation: Minimum
vertical distance from top of heater to
shelf or overhanging obstruction. Minimum
horizontal distance from front of heater to
obstruction.
D. Wall mounting or portable: Minimum
distance to sidewall or obstruction.
Note 1 - For maximum heating effectiveness
the heater should be positioned at a low level.
Note2 - It is recommended that the heater is
not fitted into an unventilated enclosure which
is less than 10 cubic feet.
IMPORTANT - If wall mounted the heater
should be mounted only in the upright position
with the control panel at the bottom.