3Com 3CRWX315075A - Wireless LAN Managed Access Point 3150 Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Bezprzewodowy punkt dostępowy 3Com 3CRWX315075A - Wireless LAN Managed Access Point 3150. 3Com 3CRWX315075A - Wireless LAN Managed Access Point 3150 17 stron. Wlan managed
Drukuj stronę
3Com AP3150 Managed Access Point Features
1
6
7
Feature
1
Antenna
Connectors
2
LEDs
3
Ethernet Port
4
Serial Port
5
Reset Button
6
Kensington lock connector
7
Detachable rear-panel cover
8
Mounting Bracket
2
Description
Two RSMA type antenna connectors allow you to connect antennas
that operate in 2.4 GHz and 5.0 GHz bands.
The LEDs indicate power and activity. See "Checking the LED
Indicators" on page 9 for details.
The Ethernet port provides a 10/100BASE-TX Ethernet connection to a
3Com Wireless LAN switch. The connection can be direct to a 3Com
switch or indirect through an intermediate Layer 2 or Layer 3 network.
Use a standard Category 5 cable with straight-through signaling and
standard RJ-45 connectors to connect the access point to the switch
on the network.
The serial port is not supported.
To restore factory settings, press the reset button during power-up by
inserting a pointed object into the reset hole on the back of the access
point and holding for at least 20 seconds. XREF.
The mounting bracket comes attached to the access point and allows
the unit to be mounted on a wall or ceiling.
3
4
2
1
5
8