AEO WP501210 Podręcznik użytkownika - Strona 2

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Pompa wodna AEO WP501210. AEO WP501210 2 stron. Dc water pump kit

5. CLEANING AND MAINTENANCE

If the pump starts to lose power or stops working after operating for a period of time, please clean the pump following

the steps below (See the above figures for demonstration):

Disconnect the pump from the power source.

Pull the filter housing apart from the pump

Press on the bottom board and meanwhile slide it apart from the pump.

Turn the impeller cover counterclockwise to the end and then carefully open the impeller cover

Pull the impeller out of the pump

Wash every part to clean the debris.

Assemble the pump in reverse sequence.

Connect the pump to the power source.

*Be careful, never drop down the ceramic axis while cleaning the impeller, it breaks easily.

6. TROUBLE SHOOTING

*Pump does not operate even though the solar panel is in full sunlight.

1) No connection to the power supply — check the connection to the power supply.

2) Impeller is blocked — clean the pump as described in "CLEANING AND MAINTENANCE".

*Pump does operate but there is no water running through the tubes: clean the tube and the filter to make sure the tube

is through completely.

7. TECHNICAL DATA AND PUMP CURVE

Operating Voltage

PowerConsumption

(Pmax)

MaximumPumpHead

(Hmax)

MaximumFlowRate

(Qmax)

Dimensions

Net weight

Cable length

DC 12V-24V

5.0W@12V

21.5W@24V

3.3ft@12V

10.5ft@24V

240G/H@12V

410G/H@24V

5x2.28x3.54 inches

1.5 lbs

16.4 ft