CRS HUDDLECAMHD-3X Jak to zrobić - Strona 3

Przeglądaj online lub pobierz pdf Jak to zrobić dla System konferencyjny CRS HUDDLECAMHD-3X. CRS HUDDLECAMHD-3X 3 stron. Lip the image

11. Open the HD Camera Debugger software on-top of the AMCAP viewer window

a. It will say "Invalid Port Number," if you have assigned your COM Port above the

designation of Port 1, this is OK we'll fix the issue in Step 11e

b. Click "OK"

c. Select a "Baud Rate" of 9600

d. Select a "Protocol" of "VISCA"

e. Select a "Port" that matches the port number, 4 or below, that you assigned your Serial

COM port

Test that the "Left" and or "Right" controls are controlling the camera from the software

g. Click on the "Rev" button

i. This should have flipped your image

ii. If it DID NOT flip your image please use the HuddleCamHD remote control

5. Under the "COM Port Number" select something a port assignment of 4

or below

a. Note you may need to shuffle some COM Port Numbers for

devices to make this work

6. Click "OK"

7. Click "OK"

8. Close Windows Device Manager

1. Point the remote at the HuddleCamHD front, labeled "HuddleCam" and

click on the "REV" button

2. This should have flipped your image