CRT ELECTRO UV Podręcznik - Strona 15
Przeglądaj online lub pobierz pdf Podręcznik dla Transceiver CRT ELECTRO UV. CRT ELECTRO UV 20 stron. Dual band transceiver 144-146 mhz rx/tx 430-440 mhz rx/tx
Drukuj stronę
5. FUNCTION SETTING
No.
Function name
TX OFF
13
Scrambler
14
Compander
15
NC(Noise reduction)
16
5Tone
17
2Tone
18
Sub channel display
19
20
Key beep
Time out timer
21
22
DMTF transmit time
Squelch level
23
Scan pause time
24
LCD brightness
25
VOX level
26
VOX delay
27
28
Tone burst frequency
Channel display
29
Reset
30
5.3 Reset Factory Default
If your radio seems to be malfunctioning because of wrong operation or setup, this function
will resume all setup and channels to factory default.
1. Press front panel
2. Press
or
key to chooe 27th function, the LCD display reset options.
3. Press
key to chooe
/
4. Hold
key, until the radio re-power on.
After reset, all channel and fucntion setting will resume default value.
»
If choose
"INITIALIZE？"
Value
ON、OFF
1~11、edit、OFF
ON、OFF
ON、OFF
Press PTT to transmit
1~100,
Press PTT to transmit
1~32,
FREQ、VOLT、OFF
ON、OFF
1~30Min、OFF
50ms~500ms
OFF、1~9
5ST、10ST、15ST、2SP
1~5
OFF, 1-9
0.5-5 Second
1750Hz、2100Hz、1000Hz、1450Hz
FREQ、CH、NAME
FACTORY？ INITIALIZE？
key to enter main MENU list.
"FACTORY？"。
, only function setting value will resume to default setting.
11