CRU RTX430-3QR Podręcznik użytkownika - Strona 9

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Obudowa CRU RTX430-3QR. CRU RTX430-3QR 16 stron.
Również dla CRU RTX430-3QR: Skrócona instrukcja obsługi (4 strony)

Drukuj stronę
CRU RTX430-3QR Podręcznik użytkownika
The LCD will display "Select RAID Type". Press Up or Down to cycle through to your desired
c.
RAID type and then press Enter to confirm your selection.
d.
The screen will display "Will Erase all Data OK?" Pressing Enter will result in the loss of all data
on the drives. Ensure all of your data is backed up, then press Enter.
e.
The new configuration will be selected and the RTX enclosure will reboot. The RAID is now
created.

5.3 Add a New Drive to an Existing RAID

Follow these steps to add a new drive to an existing RAID. This is necessary if you are replacing a
failed hard drive within a RAID 1, RAID 5, or RAID 10, or if you are adding an additional drive to a
RAID 1, RAID 5, or RAID 10.
d.
Remove the failed hard drive (if applicable).
e.
Insert a new hard drive in an empty TrayFree drive bay.
f.
After the hard drive spins up, the RTX unit should detect the drive. The LCD will ask to add a
new disk. Press Enter to do so.
The disk will now be added to the RAID and the RAID will begin to rebuild. A 1TB hard drive takes
just over three hours to rebuild. To display the approximate remaining time on the LCD display, press
Enter.

6 Usage with Windows and macOS Operating Systems

6.1 Usage with Windows Operating Systems

6.1.1 Format a Drive

When you first mount a drive to a Windows operating system, a pop-up window will ask you if you
would like to format it. Click Format Disk and skip to Step E in the instructions for your oper-
ating system below. If the prompt does not pop up, use the Disk Management utility by following
the steps below for your specific Windows operating system:
Windows 10
a. Right-click on the Start Button and then select Disk Management.
b. The drive should appear in the list of Disks in the lower pane. You may need to scroll
down to see it. If the drive is already formatted, you can identify it easily by its volume
name. If the drive is not initialized or is brand new, a window will pop up asking you to
select a partition type. Select GPT and press OK.
RTX430-3QR User Manual
9