CRU RTX 800-TR Skrócona instrukcja obsługi - Strona 2
Przeglądaj online lub pobierz pdf Skrócona instrukcja obsługi dla Sprzęt sieciowy CRU RTX 800-TR. CRU RTX 800-TR 2 stron. Enclosure
Również dla CRU RTX 800-TR: Podręcznik użytkownika (11 strony)
Drukuj stronęNOTE: The RTX800-TR enclosure requires Thunderbolt drivers and RAID
management software to be installed on your computer. You may download
the appropriate files for your operating system from CRU's RTX800-TR product
webpage: http://www.cru-inc.com/products/RTX800-TR.php.
1 Hard Drive Installation
a. Pull the ejection handle on the TrayFree bay to open the bay door.
b. Insert a bare SAS or SATA hard drive into the bay. Make sure it is label-side
up with the data connector on the drive inserted first.
c. Shut the bay door.
Sticker Card
Use the stickers on the provided sticker card to label each drive. This will
prevent the drives from getting mixed up when they are removed from the
bays.
2 Operating Your RTX Enclosure
a. Install your hard drives into the RTX enclosure (see Section 1.1).
b. Connect the RTX enclosure to a power outlet with the included power
cord.
c. Connect the RTX enclosure to your computer using the included
Thunderbolt cable.
d. Flip the power switch on the rear of the unit to turn on the RTX enclosure.
2.1 Installing Thunderbolt Drivers
a. Download the appropriate Thunderstream SC 3808 driver for
your
operating
system
http://www.cru-inc.com/products/RTX800-TR.php.
b. O n Windows machines, open the ZIP file and run the included .EXE file.
Press the Unzip button and then follow the prompts to install the driver.
On Mac machines, the folder will automatically unzip. Open the folder
and double click on the .dmg file. A new folder will open. Double click
on the .pkg file and follow the prompts to install the driver. A computer
restart will be required.
2.2 Install ATTO ConfigTool
a. Download the version of ATTO ConfigTool appropriate for your operating
system from the RTX800-TR product page:
products/RTX800-TR.php.
from
the
RTX800-TR
product
http://www.cru-inc.com/
b. On Windows machines, open the .exe file and click the Unzip button. The
setup files will unzip. Press OK. Navigate to the folder you unzipped it to
(the default path is "C:\ATTO\ConfigTool") and open the ConfigTool_411.
exe file there.
For Mac, open the ConfigTool_4xx file inside of the .dmg file you
downloaded.
c. Follow the onscreen instructions. On the "Choose Install Set" screen,
select Full Installation and then click the Next button. Continue to
follow the onscreen instructions.
2.3 Configuring RAID
a. Open ATTO ConfigTool.
b. From the Device Listing panel on the left, expand the list for the computer
that your RTX is plugged into. If the RTX enclosure is plugged into the
computer you are currently using, select localhost.
c. A login window will pop up. Provide the Windows username and
password for the computer the RTX is plugged into and press OK. The
device listing for that computer will appear.
d. Click on ThunderStream SC 3808.
e. A new set of tabs will appear in the right panel. Click on the RAID tab.
If this is the first time setting up a RAID on these hard drives, the RAID
wizard will automatically open. If it does not start automatically, select
the RAID Management menu item at the top of the screen and select
Create RAID Group from the menu.
f. Select Setup DVRAID. DVRAID provides parity redundancy for your
data and is optimized for high data transfer rates. The wizard will
automatically set up DVRAID using all the storage inside of the RTX
page:
enclosure.
g. To customize your RAID setup with a standard RAID mode, download
the User Manual from the RTX800-TR product page for instructions:
http://www.cru-inc.com/products/RTX800-TR.php.
Your RTX enclosure is almost ready to use! Now that you have created a RAID,
the volume will need to be formatted before being used.
CRU Mark
10.25.12
PMS 711
2 cyan
85 magenta
76 yellow