CRU Dataport DE200 ATA/133 Instrukcja instalacji - Strona 2

Przeglądaj online lub pobierz pdf Instrukcja instalacji dla Akcesoria komputerowe CRU Dataport DE200 ATA/133. CRU Dataport DE200 ATA/133 2 stron.

Drukuj stronę

Drive Activity Indicator Connector J5 (Drive Carrier Circuit Board)

Jumper removed (Factory Default) disables drive activity indicator.

Jumper installed enables drive activity indicator.

NOTE: If two (2) drives are installed (with J5 enabled on

both drives), both drive activity indicators will flash simulta-

neously, even if only one drive is being accessed.

Unit ID Select Switch Settings

NOTE: The unit ID number display is for ID display purposes

only. The master/slave setting must still be set on the drive

itself (refer to the drive manufacturer's documentation for

further information).

The following table lists the unit ID select switch settings and

the valid AT/IDE unit numbers. Please note that all invalid switch

settings have "X's" and result in a blank display in the receiving

frame window.

Unit ID Select

Position

Drive

Master Slave

Selection

Unit ID Select

Blank

Position

Selecting the Unit ID Number

Use the alignment tool (provided) to select the ID number of the

disk drive.

Unit ID

Select

Rotating

Switch

Drive Carrier

Guide

Receiving

Frame

Unit ID Select Switch Location

Master Slave

Blank Blank

Blank Blank Blank

Unit ID

Number

Display

Lock &

DC Power

Switch

Rugged, Reliable, Mobile, Secure

NOTE: The lock on the Data Express serves as a power

switch. It must be engaged (turned counterclockwise) for the

Data Express to power up and function properly.

Limited Product Warranty

CRU-DataPort (CRU) warrants the Data Express DE200 to be free

of significant defects in material and workmanship for a period of

five years from the original date of purchase. CRU's warranty is

nontransferable and is limited to the original purchaser.

Limitation of Liability

The warranties set forth in this agreement replace all other war-

ranties. CRU expressly disclaims all other warranties, including but

not limited to, the implied warranties of merchantability and fit-

ness for a particular purpose and non-infringement of third-party

rights with respect to the documentation and hardware. No CRU

dealer, agent or employee is authorized to make any modifica-

tion, extension, or addition to this warranty. In no event will CRU

or its suppliers be liable for any costs of procurement of substi-

tute products or services, lost profits, loss of information or data,

computer malfunction, or any other special, indirect, consequen-

tial, or incidental damages arising in any way out of the sale of,

use of, or inability to use any CRU product or service, even if CRU

has been advised of the possibility of such damages. In no case

shall CRU's liability exceed the actual money paid for the products

at issue. CRU reserves the right to make modifications and addi-

tions to this product without notice or taking on additional liability.

Certification

EMI Standard:

EMC Standard:

FCC Certification

Front of

This device has been tested and found to comply with the

Unit

limits for a Class B digital device, pursuant to Part 15 of the

FCC rules. Operation is subject to the following two condi-

tions:

1. This device may not cause harmful interference.

2. This device must accept any interference received;

including interference that may cause undesired operation.

Drive

Carrier

(Removed)

1-800-260-9800

FCC Part 15 Class B, CE

EN55022, EN55024

A7-200-0008 Rev. 1.0