Ariesys ARP893 Podręcznik użytkownika - Strona 12

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Przemysłowy komputer PC Ariesys ARP893. Ariesys ARP893 12 stron.

4.0 Software Installation

You can use the built-in DVD-RW to load operating system and additional applications

software into the system. Available medium from USB or download can also be possible.

Window Boot up: Windows boot up requires you to have Windows installed in the hard disk

drive. During Windows boot up, you will see a sequence of access to your hard disk drive

which will eventually take you into a graphical user interface environment.

Other O/S description: Many other operating systems are available in the market, such as

Linux, Windows, Solaris and DOS. These operating systems will behave differently and you

should react accordingly.

1. Installation problem:

1. Normally problem with a fail start up is due to installation problem.

2. Double check all the peripheral cards or items you have added to the ARP.

3. Are all the items seated properly?

4. Are all the cables connected back to its original or correct position?

5. Are the items you have added compatible?

6. Before you check for these, turn the computer off and unplug the power cord.

7. Check for 1 thru 5 and then re-power up the computer.

8. Remove all items that were added and re-try system power up.

9. If the system starts now, try inserting 1 new item in at a time and try powering up.

10. Repeat this step until you get the desired result.

2. BIOS Beep Code:

The BIOS beep code indicates error in system initialization. The BIOS of the system board

will associate with video and memory error. Please check your video card is properly

seated and your memory is installed properly.

3. System Fails to power up:

1. Check you power connection first.

2. Check the main power switch is in the ON positions (I) *If cold switch is available.

3. Press the power button located on the machine.

4. No display (LCD):

1. Check all the proper power up procedure has been taken.

2. Hook up an external LCD to the VGA port, to check if video is present.

3. If video is present on external LCD, check the internal LCD cable connection.

4. Or check your VGA setting to make sure LCD video is enabled.

5. If there is no video on external, check your system to make sure everything is seated

properly.

6. If everything is seated properly and still no video, call us for further assistance.

5. External LCD no display:

1. Check to see if you have internal LCD video.

2. Check if your LCD is functioning properly.

3. Check your VGA setting to make sure external video is enabled.

１２