Ariesys AMK504 Podręcznik użytkownika - Strona 9
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Sprzęt sieciowy Ariesys AMK504. Ariesys AMK504 10 stron.
Drukuj stronęQUICK REFERENCE SHEET
Command
Hotkeys
Select PC Port
ScrLk + ScrLk + (x)
x = 1~2/ 1~4 for PC port number
Select Hub Port
ScrLk + ScrLk + (Fx)
Control
Fx = F1~F2/ F1~F4 (Fx is a function key)
x = 1~2/ 1~4 for hub port number
Select Audio&Mic Port
ScrLk + ScrLk + (Fy)
Fy = F5~F6/ F5~F8 (Fy is a function key)
y = 5~6/ 5~8 for audio&mic port number
Bind PC and Hub Port
ScrLk + ScrLk + Z
Control Switching
Unbind PC and Hub
ScrLk + ScrLk + X
Port Control Switching
Bind PC and
ScrLk + ScrLk + Q
Audio&Mic Switching
Unbind PC and
ScrLk + ScrLk + W
Audio&Mic Switching
Previous PC port
ScrLk + ScrLk + ↑ (arrow up)
Next PC port
ScrLk + ScrLk + ↓ (arrow down)
ScrLk + ScrLk +
Previous PC port
Beep Sound On/Off
ScrLk + ScrLk + B
Define Hotkey
ScrLk + ScrLk + H + (y)
Preceding Sequence
y = SCROLL LOCK, CAPS, ESC, F12 or
NUM LOCK
Autoscan
ScrLk + ScrLk + S
Autoscan with
ScrLk + ScrLk + S + (z)
Programmable Delay
z = 0~9
Time
Stop Autoscan
Press any button
Notes:
1. The USB keyboard hotkeys allows you a faster and broader control for your KVM switching operation in addition to the front-panel
button. If you have configured a hotkey preceding sequence other than two consecutive scroll locks, here you should change your
hotkey sequence accordingly. (For preceding sequence key configuration, please refer to "Operation" in above table.)
2. When the binding of PC & USB hub port control switching is enabled by the hotkey sequence: ScrLk + ScrLk + Z, any PC and hub
port control switching are bound together. To remove this binding, use the hotkey sequence: ScrLk + ScrLk + X.
3. When the binding of PC and audio&mic switching is enabled by the hotkey sequence: ScrLk + ScrLk + Q, any PC and audio&mic
switching are bound together. To remove this binding, use the hotkey sequence: ScrLk + ScrLk + W.
(Backspace)
Description
Select the active PC port
(Jointly select PC port / hub port control / audio mic, if
binding is enabled)
Select the PC port that control all USB hub ports
(Jointly select PC & hub port control, if PC/ hub port control
binding is enabled)
Select the active audio&mic port
(Jointly select PC & audio&mic port, if binding is enabled)
Enable the binding of PC port and hub port control switching.
(Once this feature is enabled, any pc and/or hub port control
switching is bound together) (factory default)
Disable the binding of PC port and hub port control switching
Enable the binding of PC port and audio&mic switching.
(Once this feature is enabled, any pc and/or audio&mic
switching is bound together) (factory default)
Disable the binding of PC port and audio&mic switching
Select the previous connected PC port
(Jointly select PC/ hub port control, if binding is enabled)
Select the next connected PC port
(Jointly select PC/ hub port control, if binding is enabled)
Toggle between the previous port and current port
Toggle on/off the beep sound while autoscanning
Select the hotkey preceding sequence among 5 alternative
keys
Autoscan through every connected port for quick screen
browsing of each port (scan delay = 5 sec.).
Autoscan with a user-defined delay time within a range of 10
~ 100 seconds
Terminate autoscan activity
９