Crumar bassman Podręcznik użytkownika - Strona 11

Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Syntezator Crumar bassman. Crumar bassman 15 stron.

Velocity on-off option

Bassman Rev.2 (with the two black dots on front panel) has got an option for

enable velocity response (touch response) on the 13 pedals. By default velocity is

OFF and even if you touch the pedalboard with deifferent pressions note on

messages always have value of 127.

For activate velocity, while holding the first C on the left for 5 seconds, insert the

power supply to the main AC or the power plug in the instrument. In this way,

when you turn on Bassman with the "ON" button, velocity is on.

You can assign velocity to differents controls of the instruments like VCF or VCA:

for details please check "SYSTEM SETTINGS" section.

MIDI channel settings

Press and release "RECORD"; press "WAVEFORM" in modulator section for

increase channel number up to 16 and then restart from 1. confirm the selection

with "RECORD"; default channel is 3.

Pitch Wheel

External messages of pitch wheel coming from "MIDI IN" increase or decrease

tuning of 2 semitones.

Modulation Wheel

External messages of Modulation wheel coming from "MIDI IN" can control VCF

(cutoff) or VCO (pitch) (see system settings)

Press and hold "RECORD" in combination of these buttons for change:

OCTAVE (OSC1) - 0 = Off

WAVEFORM (OSC1) - 0 = internal

GENERAL SETTINGS

1 = VCF control

2 = VCA control

3 = VCF/VCA control

MIDI Clock

1 = external

Velocity